NEC NC800C User Manual download pdf (Page 15)

1. What’s in the Box? and the Names of the Projector Parts

1-3-3. Connection terminals

2 53 4

1. Remote control input terminal (REMOTE IN) (Stereo mini)

Connect the remote control of the projector, using the supplied remote control cable.

Memo

• The projector’s remote control can be used by connecting with the remote control cable. (See page 13)

2. PC control signal switch (CINEMA/SYSTEM)

Use this to set data on the projector.

3. PC control terminal (RS-232C) (D-Sub 9P)

This is used when the service personnel sets the data for the projector or operates the projector from PC via RS-232C. Use

a commercially available RS-232C straight cable to connect the projector to the PC.

4. PC card slot

• Set a wireless LAN card, and you can control the projector from a PC, using a wireless LAN Please inquire your dealer/

distributor about a wireless LAN card that can be used.

• Use this slot when doing maintenance on your projector.

5. USB port (USB) (type A)

Use this port when doing maintenance on your projector.

6. HDSDI A input terminal (SDI-A) (BNC)

Connect a Video Server of Video source to this terminal. Use a 75Ω coaxial cable.

7. HDSDI B input terminal (SDI-B) (BNC)

Connect a Video Server or Video source to this terminal. Use a 75Ω coaxial cable.

8. DVI-D A input terminal (DVI-A) (DVI-D 24P)

Connect the DVI-D output terminal of a PC to this terminal. Use a commercially available DVI-D signal cable (Single Link).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 61 62

No comments

NEC NC800C User Manual Page 15