NEC PDWXS 46-55 P User Manual

– 1 –Wall mount User’s ManualManuel de l’utilisateur du montage muralManual de usuario para el montaje en paredBedienungsanleitung zur Wandbefestigung

– 10 –8.Tilt the monitor back so that it is parallel with the wall, then use the two screws (M5) removed from the monitor bracket (top) and wall brack

– 2 –CautionDO NOT mount the monitor yourself. Ask your dealer for assistance. For • proper installation it is strongly recommended to use a trained

– 3 –Installation Procedure/Procédure d’installation/Procedimiento de instalación/Installationsverfahren/Procedura d’installazione/設置手順/安装步骤1.Fasten t

– 4 –2.Attach the wall brackets (top)/(bottom) to the wall as shown on the installation drawing (separate sheet).NOTE: The wall bracket’s (top) wall

– 5 –3.Place a protective sheet on a table or other flat surface, then place the monitor on top with the back of the monitor facing up. Remove the two

– 6 –4.Mount the monitor brackets (top)/(bottom) to the top and bottom of the back of the monitor using the included screws (M6). (Fig. 4)NOTE: Mount

– 7 –5.Lift the monitor, insert the long projections on the monitor bracket (bottom) into the two holes in the wall bracket (bottom), hook t

– 8 –6.Connect one end of the chain attached to the wall bracket (top) to the monitor bracket (top) using the included screw (M5). (Fig. 6)Connectez l

– 9 –7.Remove the two screws (M5) attached to the top wall bracket in step 1 (Fig. 7-1), then slowly tilt the monitor forward to provide space for the