NEC EA294WMI-BK User Manual Page 1

MultiSync EA294WMiUser’s Manual

English-88. Turn on the computer, then turn on the monitor by pressing the power sign on the front bezel (Figure E.1).9. No Touch Auto Adjust automa

English-9EnglishFigure S.1Tilt and SwivelGrasp the top and bottom sides of the monitor screen with your hands and adjust the tilt and swivel as desire

English-10Mount Flexible ArmThis LCD monitor is designed for use with a fl exible arm.1. Follow the instructions on how Remove Monitor Stand for Mount

English-11EnglishControlsOSD (On-Screen Display) control keys on the front of the monitor function are as follows:To access OSD menu, touch any of the

English-12 ECO TOOLSBRIGHTNESSAdjusts the overall image and background screen brightness.If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will

English-13EnglishHUMAN SENSINGThe human sensor on the front side of the monitor detects the movement of a person by using the HUMAN SENSING function.

English-14FINE (Analog input only)Improves focus, clarity and image stability by increasing or decreasing this setting.If the “AUTO ADJUST” function a

English-15English ColorColor Control System: Color presets select the desired color setting.1, 2, 3, 5: Increases or decreases Red, Green or Blue colo

English-16RESPONSE IMPROVETurns the Response Improve function on or off. Response Improve may reduce blurring that occurs in some moving images.OFF TI

English-17EnglishDATA COPYTo initiate data copy from the master monitor to the sub monitor(s), select “DATA COPY” and touch “SELECT”. A “PROCEEDING...

IndexWarning, Caution ...Englis

English-18Specifi cationsMonitor Specifi cations MultiSync EA294WMi NotesLCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 7

English-19EnglishFeaturesDisplayPort: DisplayPort is designed to be the future-ready and scalable solution for high performance digital display connec

English-20TroubleshootingNo picture• The signal cable should be completely connected to the display card/computer.• The display card should be compl

English-21EnglishNo Video• If no video is present on the screen, turn the Power Key off and on again.• Make certain the computer is not in a power-s

English-22Using the Auto Brightness functionThe brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lig

English-23EnglishUsing Picture by Picture (PBP) FunctionThis monitor can display split screens from two sources by using any one of the input combinat

English-24Using the Zoom FunctionAllows you to use the entire screen area, signifi cantly expanding the size.Allows the picture displayed in the center

English-25EnglishB. The left image is set to be the main one.In this case, the priority image is set to be on the left side. The size of the image on

English-26ControlSync1. Connect the master monitor with a sub monitor via a ControlSync cable (ø 2.5) into ControlSync IN/OUT. 2. Follow the steps of

English-27EnglishTCO Certifi ed Edge Displays 1.2Congratulations!This product is TCO Certifi ed – for Sustainable ITTCO CertiÞ ed is an international th

English-1EnglishWARNINGCAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE

English-28NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying

English-2Registration InformationCanadian Department of Communications Compliance StatementThis Class B digital apparatus complies with Canadian ICES-

English-3EnglishRecommended useSafety Precautions and MaintenanceFOR OPTIMUM PERFORMANCE, PLEASE NOTETHE FOLLOWING WHEN SETTING UP AND USING THE LCD C

English-4CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CANREDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THEFOLLOWING WHEN YOU POSITION THE MONITOR:•

English-5EnglishContentsYour new NEC monitor box* should contain the following:• MultiSync monitor with a tilt/swivel/pivot/height adjust stand• Powe

English-6Figure 1Control keysFigure 2ScrewsQuick StartTo attach the Base to the LCD stand:1. Place monitor face down on a non-abrasive surface (Figur

English-7English3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position.4. Connect all