Nec PlasmaSync 3300 User Manual download pdf (Page 9)

G RGB 2

R, G, B, H/CS and V IN (BNC).....These are analog RGB input terminals.

Connect external components with R, G, B, H/CS, and V output terminals to

these analog RGB input terminals. Be sure that the RGB connection cable is

correctly attached to the corresponding terminals.

R, G, B, H/CS and V THROUGH OUT (BNC)..... Connect to a second monitor's

RGB inputs to relay the RGB signal inputs at R, G, B, H/CS and V IN.

75 Ω/HIGH Impedance Select Switchs for RGB and H/CS&V..... Set to "75 Ω"

during normal operation. In multiple connections using R, G, B, H/CS and V

IN and OUT terminals, set to "HIGH" on all but the last monitor. Set to "75 Ω"

on the last monitor only.

H External Speaker Terminals

+ RIGHT.....Connect RIGHT speaker positive wire here.

- RIGHT.....Connect RIGHT speaker negative wire here.

- LEFT.....Connect LEFT speaker negative wire here.

+ LEFT.....Connect LEFT speaker positive wire here.

I Internal Speaker Terminals

To enable the internal speakers, use the supplied speaker cables to con-

nect between the external speaker terminalsH and here.

J AC Input

Connect the supplied power cord' s three-pin plug here.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

No comments

Nec PlasmaSync 3300 User Manual Page 9