Nec LT265 User Manual download pdf (Page 21)

This section describes how to set up your projector and how to connect PCs, video and audio sources.

2. Installation and Connections

 Setting Up the Screen and the Projector

Selecting a Location

The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is

approximately 30 inches (0.8 m) measured diagonally when the projector is roughly 51.2 inches (1.3 m) from the wall

or screen. The largest the image can be is 500 inches (12.7 m) when the projector is about 970 inches (24.6 m) from

the wall or screen. Use the drawing below as a guide.

Your projector is simple to set up and use.

But before you get started, you must first:

z Set up a screen and the projector.

x Connect your computer or video equip-

ment to the projector. See pages 17 -

25.

c Connect the supplied power cable. See

page 26.

NOTE: Ensure that the power cable and any

other cables are disconnected before moving

the projector. When moving the projector or

when it is not in use, cover the lens with the

lens cap.

To the wall outlet.

Distance

Screen size (Unit: cm/inch)

Screen size

Lens center

609.6 (W) ⳯ 457.2 (H) / 240 (W) ⳯ 180 (H)

487.7 (W) ⳯ 365.8 (H) / 192 (W) ⳯ 144 (H)

406.4 (W) ⳯ 304.8 (H) / 160 (W) ⳯ 120 (H)

365.8 (W) ⳯ 274.3 (H) / 144 (W) ⳯ 108 (H)

304.8 (W) ⳯ 228.6 (H) / 120 (W) ⳯ 90 (H)

243.8 (W) ⳯ 182.9 (H) / 96 (W) ⳯ 72 (H)

203.2 (W) ⳯ 152.4 (H) / 80 (W) ⳯ 60 (H)

162.6 (W) ⳯ 121.9 (H) / 64 (W) ⳯ 48 (H)

121.9 (W) ⳯ 91.4 (H) / 48 (W) ⳯ 36 (H)

81.3 (W) ⳯ 61.0 (H) / 32 (W) ⳯ 24 (H)

61.0 (W) ⳯ 45.7 (H) / 24 (W) ⳯ 18 (H)

300"

240"

200"

180"

150"

120"

100"

60"

40"

30"

80"

1.3/50.8

(1.0/39.5)

1.7/68.5

(1.4/53.3)

2.6/103.8

(2.1/80.9)

3.5/139.2 (2.8/108.6)

4.4/174.5 (3.5/136.2)

5.3/209.9 (4.2/163.8)

6.7/262.9 (5.2/205.2)

8.0/315.9 (6.3/246.7)

8.9/351.3 (7.0/274.3)

10.7/422.0 (8.4/329.5)

13.4/528.0 (10.5/412.4)

NOTE:

•Values in parentheses for LT245.

• The screen sizes above are intermediate values between tele (minimum display area) and wide (maximum display area). Image

size can be adjusted with the zoom adjustment up to a maximum of 10%.

•To avoid premature lamp failure, do not tilt the front of the projector up or down by more than 7

from level.

Unit: m/inch

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 144 145

Comments to this Manuals

No comments

Nec LT265 User Manual Page 21

Comments to this Manuals

Related products and manuals for Projectors Nec LT265