CONFIGURATION GUIDE – NEC Express5800/R110f-1E
NEC Corporation Revision 1.0 – July 17, 2013 14
4 Internal Hard Disk Drives
4.1 RAID Configuration
Refer to the section in accordance with your disk form factor and RAID configuration.
4.1.1 Up to six 2.5-inch Drive
4.1.2 Up to eight 2.5-inch Drive
NOTE:
Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
Hot plug insertion/removal is not supported with the Embedded SATA non-RAID controller.
Internal optical drive cannot be installed when N8154-52 2.5-inch Hot Plug Drive Cage Kit is installed.
To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.
All drives within a RAID array should be of the same type, capacity and rotation speed.
All SAS hard drives within a system should be of the same rotation speed.
Mixing SAS and SATA hard drives in the same system is not supported.
Embedded SATA
RAID Controller
Comments to this Manuals