NEC LCD2180 User Manual download pdf (Page 8)

English-6

Controls

OSM (On-Screen Manager) control buttons on the front of the monitor

function as follows:

To access OSM menu, press any of the control buttons (EXIT, , , –, +).

To change signal input, press the SELECT button.

NOTE: OSM must be closed in order to change signal input.

NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the

RESET function by pressing the EXIT button.

NOTE: The OSD icon of “Brightness” and “Colour Control” may cause blinking if the colour feedback control system is

under operation. It means that if the icon is blinking, then the colour of screen has not stabilized to target colour.

When you change the “Brightness”, “Colour Control” settings, the OSD causes blinking until colour is settled to

target. And you see the same operation after every power on. Please wait until it stops the blinking.

Brightness Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

Image Controls

LEFT / RIGHT

Controls Horizontal Image Position within the display area of the LCD.

DOWN / UP

Controls Vertical Image Position within the display area of the LCD.

Colour Control Systems

Colour Control Systems: Five colour temperature presets, in addition to sRGB, AdobeRGB and

PROGRAMMABLE.

R,Y,G,C,B,M: Increases or decreases the Red, Yellow, Green, Cyan, Blue or Magenta colour Saturation

and Hue depending upon which is selected. The colour change will appear on screen in the

corresponding colours of the displayed image.

sRGB: sRGB mode provides a standard colour space that is compatible with conventional display monitors.

AdobeRGB: Provides a standard colour space used in high-end graphics applications including Digital Still

Camera and imaging, provides the highest level of colour matching to other output devices.

PROGRAMMABLE: Selects the colour settings that have been configured by an optional colour calibration

software system.

Tools 1

VIDEO DETECT: Selects the method of video detection when more than one computer is connected.

FIRST DETECT: The video input has to be switched to “FIRST DETECT” mode. When current video

input signal is not present, then the monitor searches for a video signal from the other video input port.

If the video signal is present in the other port, then the monitor switches the video source input port to

the new found video source automatically. The monitor will not look for other video signals while the

current video source is present.

Exits the OSM controls.

Exits to the OSM main menu.

Moves the highlighted area left/right to select control menus.

Moves the highlighted area up/down to select one of the controls.

Moves the bar left/right to increase or decrease the adjustment.

Active Auto Adjust function. Enter the OSM controls. Enter the OSM sub menu.

Resets the highlighted control menu to the factory setting.

EXIT

CONTROL

ADJUST - / +

SELECT

RESET

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Comments to this Manuals

No comments

NEC LCD2180 User Manual Page 8

Comments to this Manuals

Related products and manuals for TVs & monitors NEC LCD2180