Nec LCD1860NX User Manual download pdf (Page 7)

English-6

Tilt

Grasp both sides of the monitor screen with your hands

and adjust the tilt as desired (Figure TS.1).

Warning: Take care not to trap fingers between monitor

bezel and stand.

Figure TS.1

Figure S.1

Swivel

Grasp both sides of the monitor screen with your hands

and adjust the swivel as desired (Figure TS.1).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Disconnect all cables.

2. Place hands on each side of the monitor and lift up to the highest position.

3. Place monitor face down on a non-abrasive surface. (Place the screen on a 55 mm/2.2 inch platform so that the stand is

parallel with the surface.) (Figure S.1)

4. Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure S.2). The monitor is now

ready for mounting in an alternate manner.

5. Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method. (100 mm pitch)

Figure S.2

Caution: Please use the attached screws (4 pcs) when mounting. To fulfil the safety requirements the monitor must be

mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The

LCD monitor shall only be used with an approved arm (e.g. GS mark).

55 mm

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Nec LCD1860NX User Manual Page 7