Nec MM2000 User Manual download pdf (Page 20)

2. Installation

2-3. Connecting to the Image Input Terminals

This Switcher has two interface boards, MM-VIDEO and MM-RGB as standard equipment. See page 7. Connect required video signals.

Four interface boards can be inserted in the Switcher at the same time. See page 13.

BNC x 5 cable

(not supplied)

RCA(female)-to-BNC(male)

adapter (not supplied)

Component video RCA x 3 cable

(not supplied)

MM2000

DVD player

COMPONENT

Ferrite clamp

core (supplied)

Mounting the ferrite clamp core

Use the supplied ferrite clamp core.

Open the accessory ferrite clamp core and attach it to the cable.

When doing so, attach this as close as possible to end that goes to the switcher.

* Push the catch to open the ferrite clamp core.

Close the ferrite clamp core tightly.

Fix the supplied band to the cable as a stopper.

* Pull the end of the band to tighten it. Cut off the surplus of the band.

Band

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

No comments

Nec MM2000 User Manual Page 20