Projector NP4000 User’s Manual
viii Table of Contents IMPORTANT INFORMATION...
5. Using On-Screen Display 88Last – Uses the most recently used image source. Auto – Auto detects the default image source. Computer1/2/3 – Uses Compu
5. Using On-Screen Display 89 u Information Menu Descriptions and Functions The information menu provides only screens to access details quickly. The
5. Using On-Screen Display 90Source The Source tab displays various source and frequency values at a glance. The following table lists all items with
5. Using On-Screen Display 91 LAN The LAN tab displays LAN settings as previously defined (see LAN Settings on page 84).
5. Using On-Screen Display 92Version The Version tab displays all the version and product details of the projector and associ-ated software. The foll
5. Using On-Screen Display 93 v Reset Menu Descriptions and Functions Occasionally, circumstances may require that factory defaults are reset, for de
94 6. Maintenance n Cleaning the projector Cleaning the Cabinet Refer to the following guide to clean the projector cabinet. 1. Wipe off dust with a
6. Maintenance 95 Cleaning the Filters The projector uses three filters to keep the fans free of dust and other particles, and should be cleaned every
6. Maintenance 96 3. The rear filter can be accessed as shown. Once the filters are cleaned, please reset the filter hours via the Clear Filter H
6. Maintenance 97 o Replacing Consumable Parts During the course of normal usage, consumable parts become worn out resulting in reduced performance. T
Table of Contents ix From the Remote Control Unit ...39
6. Maintenance 983. Insert replacement foam and press down firmly. 4. Replace the filter covers by pushing gently in the direction shown. Once th
6. Maintenance 99 Replacing the Lamps When a lamp reaches the end of it’s usable life, the following message is displayed. Re-place the lamp. The pro
6. Maintenance 100To replace the lamp, refer to the following guide. 1. Loosen the screw on the lamp cover (A), and remove the lamp cover as shown (B
6. Maintenance 101 Resetting the Lamp Hours Counter After replacing the lamp(s), the lamp hour counter(s) should be reset to zero. Refer to the follow
102 7. Appendix n Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’s mouse f
7. Appendix 103 When connecting using the USB terminal The mouse receiver can only be used with a Microsoft Windows 98/Me/XP*/2000 PC system or a Mac
7. Appendix 104o Troubleshooting Indicator Messages Several indicator messages are used by the projector to alert users of problems with setup or inte
7. Appendix 105 The Lamp LEDs PROJECTOR STATUS LED CONDITION LED SEQUENCE PROJECTOR CONDITION Lamp off Off Off Lamp off End of the lamp life Red
7. Appendix 106Common Problems and Solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the p
7. Appendix 107 p Image Problems Problem: No image appears on the screen 1. Verify the settings on your notebook or desktop PC. 2. Turn off all equi
Table of Contents x Version...
7. Appendix 1084. If you have replaced the lamp recently, try resetting the lamp connections. 5. Replace the lamp module. 6. Remove the lens cover
7. Appendix 109 q Having the Projector Serviced If you are unable to solve the problem, you should have the projector serviced. Pack the pro-jector in
110 8. Specifications n Projector Specifications This section provides technical information about the projector's performance. Optical Specific
8. Specifications 111 Electrical Specifications ITEM DESCRIPTION Inputs 1 Analog RGB (Mini D-Sub 15P), 1 Analog RGB R/Cr, G/Y, B/Cb, H, V (BNC x 5),
8. Specifications 112 ITEM DESCRIPTION Power Consumption 655W in Dual Lamp Normal mode / 580W in Dual Lamp Eco mode 350W in Single Lamp Normal mode
8. Specifications 113 Regulations UL/C-UL Approved (UL 60950-1, CSA 60950-1) Meets FCC Class B requirements Meets DOC Canada Class B requirements Mee
8. Specifications 114o Cabinet Dimensions
8. Specifications 115 p Pin Assignments of Mini D-Sub 15 Pin Input Connector Signal Levels Video signal: 0.7Vp-p (Analog) Sync signal: TTL level
8. Specifications 116q Compatible Input Signal List The following table shows compatible signal types, their resolution and frequency refresh rates. H
8. Specifications 117 SIGNAL RESOLUTION (DPI) FREQUENCY REFRESH RATE (KHZ) FREQUENCY REFRESH RATE (HZ) VESA D 1280 x 960 60.00 60.00 VESA D
1 1. Introduction n What’s in the Box? Carefully unpack the projector and check that the following items are included: NP4000 Projector Remote Con
8. Specifications 118r PC Control Codes and Cable Connections The following table shows PC functions and their associated code data. FUNCTION CODE DA
8. Specifications 119 PC Control Connector (DIN-9P) Note: 1. Pin 1, 4, 6 and 9 are not used. 2. Jumper “Request to Send” and “Clear to Send” toge
8. Specifications 120s Screen Trigger When the projector is powered ON the screen trigger output sends a low voltage trigger to the screen controller
8. Specifications 121 t Operation Using HTTP Browser Overview The use of HTTP server functions will allow control of the projector from a web browser
8. Specifications 122When the IP address of the projector is 192.168.73.1, access is gained to the HTTP server functions by specifying http://192.168.
8. Specifications 123 Mail Alert Mail: Click “Enable” to enable Alert Mail feature. This option notifies your computer of an error message via e-mail
8. Specifications 124Structure of the HTTP Server Once the projector is connected to a network and configured correctly, the following screen is displ
8. Specifications 125 FUNCTION SETTING DESCRIPTION Source Select Panel Computer1 – Switches to the COMPUTER 1 IN connector Computer2 – Switches to
8. Specifications 126u 15 Pin GPIO Control Type: 15Pin D-SUB black female type PIN NO. SHORT/OPEN FUNCTION 14 SHORT OPEN EXTERNAL CONTROL MODE ON E
127 9. Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by
1. Introduction 2o Introduction to the Projector Features you’ll enjoy: z DLP projector with high resolution z High brightness High brightness outpu
9. Troubleshooting Check List 128Other Remote control does not work. No obstacles between the sensor of the projector and the remote control. Projecto
9. Troubleshooting Check List 129 Signal cable NEC standard or other manufacturer’s cable? Model number: Length:
1. Introduction 3 p Part Names of the Projector Front-right view ITEM LABEL DESCRIPTION SEE PAGE: 1. IR receiver Receiver for IR signal from re
1. Introduction 4Top View ITEM LABEL DESCRIPTION SEE PAGE: 1. Lens control panel See Lens Controls 7 2. Right-hand speaker Right-hand speaker —
1. Introduction 5 Carrying the Projector Always carry your projector by the handle. Before moving or carrying the projector, disconnect the power cab
1. Introduction 6Bottom view ITEM LABEL DESCRIPTION SEE PAGE: 1. Height adjusters Adjust projection height 40 2. Intake vent Color wheel cooli
1. Introduction 7 q Top Features Lens Controls ITEM LABEL DESCRIPTION SEE PAGE: 1. ZOOM Increase/decrease projected image size 46 2. UP CURSOR
© NEC Display Solutions, Ltd. 2007 First edition April 2007 • DLP is a registered trademark of Texas Instruments. BrilliantColor and Dyn
1. Introduction 8OSD Controls and Status LEDS ITEM LABEL DESCRIPTION SEE PAGE: 1. MENU Open / Close the OSD 57 2. SELECT PAD Navigate and cha
1. Introduction 9 ITEM LABEL DESCRIPTION SEE PAGE: Green 8. LAMP 2 Flashing See Indicator Messages 104 Green Orange 9. POWER (LED) Flashing See
1. Introduction 10r Terminal Panel Features ITEM LABEL DESCRIPTION SEE PAGE: 1. COMPUTER 3 IN Connect the DVI cable (not supplied) from a compute
1. Introduction 11 ITEM LABEL DESCRIPTION SEE PAGE: 10. SC TRIGGER When connected to the screen through a com-mercially available cable, the scre
1. Introduction 12s Part Names of the Remote Control The Remote Control unit supplied with the projector combines ergonomic design and utility and inc
1. Introduction 13 Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent lights can
1. Introduction 14Battery Installation The Remote Control unit included with the projector does not contain batteries, though batteries are supplied a
1. Introduction 15 Operating Range for Wireless Remote Control The infrared signal operates by line-of-sight up to a distance of about 22 feet (7m) a
1. Introduction 16Using the Remote Control in Wired Operation Connect the supplied remote cable to the REMOTE2 jack on the projector (see r Ter-minal
17 2. Installation and Connections n Setting Up the Screen and the Projector This section briefly describes how to set up your projector and how to c
i Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC NP4000 projector and keep the manual hand
2. Installation and Connections 18o Selecting a Location Locating the projector correctly ensures optimum performance and a longer parts life. Take no
2. Installation and Connections 19 p Installing or Removing the Optional Lens CAUTION: • Do not shake or place excessive pressure on the projector
2. Installation and Connections 202. Push the LENS RELEASE button all the way in and rotate the lens counterclockwise. The existing lens will be dise
2. Installation and Connections 21 CAUTION: When Installing the lens into the projector, be sure to remove the lens cap from the back of the option
2. Installation and Connections 22Installing the New Lens Using the anti-theft screw Using the anti-theft screw to prevent theft of the lens. Tighten
2. Installation and Connections 23 q Throw Distance and Screen Size Example of NP08ZL: The further your projector is from the screen or wall, the lar
2. Installation and Connections 24 Screen Size NP09ZL NP10ZL 2.22 - 4.43 4.43 - 8.3 Diagonal Width Height (B) Distance (A) [inches] [m] [inches
2. Installation and Connections 25 r Replacing Color Wheel The NP4000 projector comes with a four-segment color wheel installed. An additional six-s
2. Installation and Connections 264. Unscrew the retaining screws on the four-segment color wheel. 5. Lift the unit in the direc-tion shown. 6.
2. Installation and Connections 27 7. Secure the retaining screws as shown. 8. Replace the wheel cover as shown and secure the screws to lock the
Important Information ii Laser Rating This label is on the side of the remote control. This mark is on the top of the remote control. CAUTION Use o
2. Installation and Connections 28s Making Connections Connecting Your PC or Macintosh Computer Enabling the computer’s external display Displaying an
2. Installation and Connections 29 2. Turn on the projector and select the chosen method of connection from the source menu before turning on the P
2. Installation and Connections 30Connecting an External Monitor Connect an external monitor to the projector through RGB out connections as shown be-
2. Installation and Connections 31 Connecting Your DVD Player with Component Output To connect a DVD Player to the projector, refer to the following
2. Installation and Connections 32Connecting Your VCR or Laser Disc Player To connect you VCR or Laser Disc Player, refer to the following diagram. N
2. Installation and Connections 33 t Connecting the Supplied Power Cable Refer to the following guidelines to connect the power supply to the project
34 3. Projecting an Image (Basic Operation) n Turning on the Projector Once the projector is correctly located and the power cable and other connecti
3. Projecting an Image (Basic Operation) 35 Note on Startup Screen (Menu Language Select screen) In the first instance of powering on the projector,
3. Projecting an Image (Basic Operation) 36o Selecting a Source The Source can be selected from the projector's control panel or from the remote
3. Projecting an Image (Basic Operation) 37 p Adjusting the Picture Position and Picture Size The Picture Position and Picture Size can be adjusted m
Important Information iii RF Interference (for USA only) WARNING: The Federal Communications Commission does not allow any modifications or changes t
3. Projecting an Image (Basic Operation) 384. The Aspect Ratio win-dow is displayed. Select the desired picture size using ▲or▼ and press Enter. 5.
3. Projecting an Image (Basic Operation) 39 From the Remote Control Unit 1. Press the Lens Shift but-ton to bring up the Lens Shift window. 2. Pre
3. Projecting an Image (Basic Operation) 40Adjusting the Projector Level 1. To raise the level of the projec-tor, twist the adjusters clockwise. 2.
3. Projecting an Image (Basic Operation) 41 q Optimizing an RGB Image Automatically Adjusting the Image Using Auto Adjust To optimize an RGB image au
3. Projecting an Image (Basic Operation) 42r Adjusting Volume Up and Down The volume can be adjusted from the OSD Control Panel or with the Remote Con
3. Projecting an Image (Basic Operation) 43 s Turning off the Projector Once the projector is no longer required, it is important to shut it down cor
3. Projecting an Image (Basic Operation) 44About Direct Power Off The projector has a feature called "Direct Power Off". This feature allows
45 4. Convenient Features n Turning Off the Image and Sound The projected image and sound can be turned off for short periods of time with the remote
4. Convenient Features 46p Adjusting the Focus/Zoom Manually The focus and zoom can be adjusted manually from the projector focus/zoom panel or from t
4. Convenient Features 47 q Changing Lamp Mode The projector has two lamp modes available, Normal and Eco. The Normal mode is used for everyday stand
Important Information iv • If you wish to have the projector installed on the ceiling: Do not attempt to install the projector yourself. The pr
4. Convenient Features 48Changing Lamp Mode by Using the Remote Control 1. Press the Lamp Mode button on the remote control to access the Lamp Mode m
4. Convenient Features 49 r Getting Information Press the HELP button on the remote control to display the "Information" screen. Use ◄ or ►
4. Convenient Features 50s Adjusting Position/Clock The Position/Clock/Phase and Keystone Correction can be adjusted manually from the pro-jector&apos
4. Convenient Features 51 Correcting Keystone by Using the Remote Control IMPORTANT: When adjusting the keystone, place the projector in the follow
4. Convenient Features 52 ADJUSTMENT HORIZONTAL VERTICAL Keystone Max. +/– 35° approx. Max. +/– 40° approx. The following are conditions under wh
4. Convenient Features 53 t Preventing the Unauthorized Use of the Projector The projector has an inbuilt security feature to lock the OSD control pa
4. Convenient Features 543. You are prompted to enable the Security Function. Select OK and press Enter. Select On using the ▼ button. 4. The keywo
4. Convenient Features 55 Unlocking the Projector To unlock the projector, refer to the following guide. 1. When the projector is locked, either by
4. Convenient Features 56u Using the Physical Lock For security and authorized usage, the projector comes with two types of security features, the Ken
57 5. Using On-Screen Display n Using the Menus The projector has an On-Screen Display (OSD) that lets you make image adjustments and change various
Important Information v Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the bu
5. Using On-Screen Display 582. Press the cursor ◄ or ► button to move through secondary menus. 3. Press ▲or▼ to select menu items and ◄or► to chan
5. Using On-Screen Display 59 o Menu Tree The gray shaded area indicates factory default settings. MENU ITEM Source Computer 1, Computer
5. Using On-Screen Display 60MENU ITEM Installation Orientation Desktop Front/Ceiling Rear/Desktop Rear/Ceiling Front Communication Speed 4800bps
5. Using On-Screen Display 61 p Menu Elements Some menus and windows contain large amounts of information in a small area. Refer to the following gui
5. Using On-Screen Display 62q Source Menu Descriptions and Functions The Source menu displays all supported image sources. Select the required sourc
5. Using On-Screen Display 63 r Adjust Menu Descriptions and Functions The Adjust menu contains overall projector settings for image output such as s
5. Using On-Screen Display 64Image Options Menu The Image Options menu is used to configure image options such as screen positioning and aspect ratio.
5. Using On-Screen Display 65 Aspect Ratio Aspect Ratio alters the appearance or Ratio of the projected image. 4:3 – Standard TV screen (4:3), prop
5. Using On-Screen Display 66Video Menu The Video menu is used to configure image options such as deinterlace and telecine. Access the Video menu in t
5. Using On-Screen Display 67 Noise Reduction Select the level of noise reduction required. Range: Off, Low, Medium, High. 3D Y/C Separation 3D Y/C
Important Information vi • Turn off the projector, unplug the power cable and have the projector serviced by qualified service personnel under the fo
5. Using On-Screen Display 68Color Matrix Color Matrices define the amount of the three-color components R (red), G (green), and B (blue) in a single
5. Using On-Screen Display 69 s Detail Settings Menu Descriptions and Functions The Detail Settings menu contains basic and advanced color adjustment
5. Using On-Screen Display 70Reference The Reference mode allows the projector to differentiate between source materials for example movies, PC images
5. Using On-Screen Display 71 White Balance White Balance allows the projector to compensate for different colors of light being emit-ted by differen
5. Using On-Screen Display 72Color Correction The Color Correction tab enables the adjustment of color values in an image to remove unwanted effects,
5. Using On-Screen Display 73 t Setup Menu Descriptions and Functions The Setup menus contain the most often used settings during installation and op
5. Using On-Screen Display 74Keystone The keystone trapezoid can be adjusted by selecting this option. Select Horizontal or Vertical using ▲or▼ then,
5. Using On-Screen Display 75 Lamp Interval Lamp Interval determines the period of time after which the lamp should be swap when lamp select is not D
5. Using On-Screen Display 76Language Select the OSD language to be used. Select from the following: English German French Italian Spa
5. Using On-Screen Display 77 Installation The Installation tab contains menu options for various setup conditions such as orienta-tion and remote se
Important Information vii Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediat
5. Using On-Screen Display 78ITEM DESCRIPTION Control Panel LockSet Control Panel Lock On/Off. Note: y This Control Panel Lock does not affect the re
5. Using On-Screen Display 79 Desktop front Ceiling rearCeiling frontDesktop rear Communication Speed Select communication speed to set the baud rat
5. Using On-Screen Display 80 Color Monochrome Display Time Sets the amount of time a menu is displayed. Select from the following: Manual – Me
5. Using On-Screen Display 81 Background Background enables you to display a blue/black screen when there is no signal. The de-fault background is bl
5. Using On-Screen Display 82Remote Sensor Set the operating range for the wireless remote control. Select from the following: Front/Back Front
5. Using On-Screen Display 83 PC Control This function enables you to select the path for PC Control (see r PC Control Codes and Cable Connections on
5. Using On-Screen Display 84LAN Settings The LAN settings tab is accessed by using the Setup/Installation tab and contains gen-eral LAN settings. Th
5. Using On-Screen Display 85 Options The Options tab contains miscellaneous setup menu settings such as Power Manage-ment and Default Source Select
5. Using On-Screen Display 86ITEM DESCRIPTION Color System Select the default Color System to use for Video or S-Video input. Range: Auto, NTSC, PAL
5. Using On-Screen Display 87 Select from the following: Off 5 minutes 10 minutes 20 minutes 30 minutes Screen Trigger Set Screen Trigger
Comments to this Manuals