NEC MultiSync PA272W User Manual download pdf (Page 12)

English-10

Figure S.1

Flexible Arm Installation

This LCD monitor is designed for use with a ﬂ exible arm.

To prepare the monitor for alternate mounting purposes:

NOTE: For PA302W, the monitor must be installed or moved by two or more people.

• Follow the instructions provided by the manufacturer of the display mount.

• To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor.

See page 26-27-28 for details. Remove the monitor stand before mounting.

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Disconnect all cables.

2. Place hands on each side of the monitor and lift up to the highest position.

3. Place monitor face down on a non-abrasive surface (Figure S.1).

4. Place one hand around the base and one hand on the Quick Release Lever.

Push and hold the Quick Release Lever in the direction indicated by the

arrows (Figure S.1).

5. Lift up the stand to unhook it from the monitor (Figure S.1).

The monitor can now be mounted using an alternate method.

Reverse process to reattach stand.

NOTE: Handle with care when removing monitor stand.

Mount Flexible arm

This LCD monitor is designed for use with a ﬂ exible arm.

1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.

2. Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1).

Figure F.1

100 mm

Weight of LCD assembly: 7.4 kg (PA242W)

100 mm

Weight of LCD assembly: 8.9 kg (PA272W)

10.7 kg (PA302W)

200 mm

Caution: Use ONLY the screws (4 pcs) that are included or M4 sized screws (Length: thickness

of bracket and washer + 10-12 mm) when mounting to avoid damage to the monitor

and stand. To fulﬁ l the safety requirements the monitor must be mounted to an arm

which guaranties the necessary stability under consideration of the weight of the

monitor. The LCD monitor should only be used with an approved arm (e.g. GS mark).

NOTE: Tighten all screws.

(recommended Fasten Force: 98 - 137N•cm)

Mounting

Bracket

Screw

Washer

Unit

10-12 mm

Thickness

of bracket

and washer

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Comments to this Manuals

No comments

NEC MultiSync PA272W User Manual Page 12

Comments to this Manuals

Related products and manuals for LED displays NEC MultiSync PA272W