search

NEC XM37 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 38
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 8
9
7
8
8 RGB 1 (MultiCable)
RGB Input/Throughput.....Attach either end of the MultiCable to a
computer, and then attach the other end to either of these two
connectors. You can then use the remaining connector, if you
wish, to output the computer signal to a monitor. (If you do use a
second monitor, turn the monitor switch to “on.”) Either connector
can be used for input or output, however they cannot both be
used for input simultaneously. It can damage your computer.
75 Ω/HIGH Impedance Select Switch.....This switch should be “75Ω”
for normal use without external termination or when your RGB
signal should be terminated with 75Ω. Switch to the “HIGH”
position when you have another monitor attached to your RGB
through-put connector.
9 RGB AUDIO
AUDIO R IN.....This is where you connect RGB right audio output
from a computer or another RGB source.
AUDIO L(MONO)IN.....This is where you connect RGB left audio
output from a computer or another RGB source.
AUDIO R THROUGH OUT.....Connect to a second monitor’ s
RGB right audio input.
AUDIO L THROUGH OUT.....Connect to a second monitor’s
RGB left audio input.
0 VIDEO 2
VIDEO 2 IN (BNC type).....Connect another VCR or laser disk
player here to display the video.
S-VIDEO 2 IN.....Connect S-Video input from another external
source like a VCR.
Terminal Board
THROUGH OUT (BNC type).....Connect to a second monitor’ s video
input to relay the video signal input at VIDEO 2 IN.
THROUGH OUT (S-VIDEO).....Connect to a second monitor’ s S-
connector input to relay the video signal input at S-VIDEO 2 IN.
75 Ω/HIGH Impedance Select Switch for BNC type.....Set to “75 Ω”
during normal operation. In multiple connections using VIDEO 2
IN and THROUGH OUT (BNC type) terminals, set to “HIGH” on all
but the last monitor. Set to “75 Ω” on the last monitor only.
AUDIO R IN.....This is your right channel audio input for stereo
sound.
AUDIO L IN (MONO).....This is your left channel audio input for
stereo sound coming from video equipment or audio system. It
also serves as the mono audio input.
AUDIO R THROUGH OUT.....Connect to a second monitor’ s right
channel audio input.
AUDIO L THROUGH OUT.....Connect to a second monitor’ s left
channel audio input.
A VIDEO 1
VIDEO 1 IN (BNC type).....Connect a VCR or laser disk player here
to display the video.
S-VIDEO 1 IN.....Here is where you connect S-Video input from an
external source like a VCR.
THROUGH OUT (BNC type).....Connect to a second monitor’ s video
input to relay the video signal input at VIDEO 1 IN.
A
8
9
VIDEO 1 VIDEO 2 RGB AUDIO RGB 1
THROUGHPUT
REMOTE
EXTERNAL CONTROL
VIDEO RGB PROCEED
EXIT
DIP SW
AC IN
SPEAKER SELECT
EXT SPEAKER
RGB 2
AUDIO AUDIO
IN/OUT
HIGH 75Ω
R
MONO
IN
THROUGH
OUT
THROUGH
OUT
IN
BNC S
HIGH 75Ω
THROUGH
OUT
IN
R
THROUGH
OUT
IN
R
THROUGH
OUT
IN
BNC S
HIGH 75Ω
IN
THROUGH
OUT
R G B H/CS V
HIGH 75ΩHIGH 75Ω
SPEAKRES MUST
HAVE MORE THAN
5WATT RATING
INPEDANCE 8 OHM
RIGHT LEFT
INT EXT
IN
THROUGH
OUT
1
2
1
2
12345678
ON
()
L
MONO
()
L
MONO
()
L
MONO
()
L
0
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Comments to this Manuals

No comments
Related products and manuals for Monitors CRT NEC XM37
Monitors CRT NEC V520 User Manual   (1 pages)
Monitors CRT NEC NCM-1716-P0-B0 Datasheet   (2 pages)
  • American Fireglass Datoptic Andis Company Raynor EvenGlo
  • Sanyo Camera accessories Curtis CRT TVs FIELD CONTROLS Unknown Amazon Mobile phones Hawking Technology Routers
  • Electrolux EW6S4R04W Electrolux EOB5851AOX HP ZBook Studio G4 Base Model Mobile Workstation Hamilton Electronics HA-802 Cuddeback CuddeView X2
  • Samsung MM-E330D User Manual Dell PowerEdge M710HD User Manual Hotpoint RGB780REHSS Use and Care Manual LG LSN360HV2 User Manual Samsung SCX-4650N User Manual