Nec FE991SB User Manual download pdf (Page 29)

1-29

MultiSync FE791

/ FE991

Quick Start

To attach the MultiSync FE monitor to your system, follow these instructions:

1. Turn off the power to your computer.

2. If necessary, install the display card into your system. For more information, refer to the display card

manual.

3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card

in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync FE Macintosh cable adapter (not included) to the monitor connector

on the Macintosh (Figure B.1). Attach the 15-pin mini D-SUB end of the captive signal cable to the

MultiSync FE Macintosh cable adapter on the computer (Figure B.1). Tighten all screws.

4. Connect one end of the power cord to the MultiSync FE monitor and the other end to the power

outlet (Figure C.1).

5. Turn on the monitor (Figure D.1) and the computer.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

Figure A.1

15-pin

mini

D-SUB

Captive Signal Cable

Figure B.1

Mac Adapter

(Not Included)

Captive Signal Cable

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 40 41

No comments

Nec FE991SB User Manual Page 29