Nec MT1035 User Manual download pdf (Page 17)

This section describes how to set up your MultiSync MT1035 LCD projector

and how to connect video and audio sources.

Setting Up Your MultiSync MT1035 LCD

Projector

Your MultiSync MT1035 LCD Projector is simple to set up and use. But

before you get started, you must first:

1. Determine the image size

2. Set up a screen or select a non-glossy white wall onto which you can project

your image.

Carrying The LCD Projector Always carry your LCD projector by the

handle. Ensure that the power cord and any other cables connecting to video

sources are disconnected before moving the projector. When moving the

projector or when it is not in use, cover the lens with the lens cap.

INSTALLATION2

Selecting A Location The further your LCD projector is from the screen or

wall, the larger the image. The minimum size the image can be is approxi-

mately 25" (0.64 m) measured diagonally when the projector is roughly 3

feet (1.0 m) from the wall or screen. The largest the image can be is 320" (8.1

m) when the projector is about 39.37 feet (12.0 m) from the wall or screen.

300

250

200

150

100

0.0 3.28 6.56 13.12 19.69 26.25 32.81 39.37 ft.

(1.0) (2.0) (4.0) (6.0) (8.0) (10.0) (12.0) (m)

Throw Distance

Diagonal Screen Size (inch)

Projection Distance and Image Size

320”

245”

WIDE

TELE

30”

25”

INSTALLATION

Width

Height

Screen size

(diagonal)

Projection distance

Rivet

String

Lens cap

Attaching the lens cap to the lens hood

with the supplied string and rivet.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 52 53

Comments to this Manuals

No comments

Nec MT1035 User Manual Page 17

Comments to this Manuals

Related products and manuals for Projectors Nec MT1035