Nec MultiSync MT600 User Manual download pdf (Page 26)

Projector Control Icons

Auto Start Turns the LCD projector on automatically when the

main power switch is turned on. This eliminates the need to always

use the “Power” button on the remote control or projector cabinet.

Auto Picture When on, the “Picture” and “Fine Picture” adjust-

ments are made automatically.**

High-Contrast Increases contrast so the image from a document

camera is easier to see.

Speakers Turns the projector’s speakers on and off.

Power Management When “Power Management” is on and

there is no RGB video input for five minutes or more, the

projector will automatically turn itself off. Note that VIDEO and

S-VIDEO sources are ignored.

Display Mode This toggles your projector between resolutions

of 800 x 600 (+) and 640 x 480 (-). The 800 x 600 resolution is

only available for signals with a horizontal frequency of 35 kHz

or higher. Press (+) if you want to compress an 800 x 600 image

into the 640 x 480 display area.

OPERATION

WARNING

• Only use your LCD projector on a solid, level surface. If the projector falls to the

ground, you can be injured and the projector severely damaged.

• Do not use the LCD projector where temperatures vary greatly. The projector must

be used at temperatures between 32°F (0°C) and 104°F (40°C).

• Do not expose the LCD projector to moisture, dust, or smoke. This will harm the

screen image.

• Ensure that you have adequate ventila-

tion around your LCD projector so heat

can dissipate. Do not cover the vents on

the bottom or back of the projector.

Ceiling Installation

Installing your MultiSync MT600 LCD

Projector on the ceiling must be done by a

qualified technician. Contact your NEC

dealer for more information.

Do not attempt to install the projector your-

self.

h3 h2 h1

Screen size: 80"

Lens position

47.2"

1200mm

Distance

Height

102.36"

2600mm

h1 = 49.21" (1250 mm) : H = 29.53" (750 mm)

h2 =59.06" (1500 mm) : H =19.69" (500 mm)

h3 =68.90" (1750 mm) : H = 9.84" (250 mm)

H = Distance between the projector

bottom and the ceiling

h = Distance between the screen center

and the floor

39.37"

1000mm

118.11" 3000mm

2˚ (0-7˚)

7.3˚

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Nec MultiSync MT600 User Manual Page 26

Comments to this Manuals

Related products and manuals for Projectors Nec MultiSync MT600