NEC X462HB User Manual download pdf (Page 26)

English-24

LAN SETTING When you use this function, EXTERNAL CONTROL should be “LAN”.

NOTE: When changing the LAN SETTING, you need to wait several seconds until the LAN

SETTING is applied.

DHCP Enabling this option automatically assigns an IP address to the monitor from your DHCP server. DISABLE

Disabling this option allows you to register the IP address or subnet mask number obtained

from your network administrator.

NOTE: Consult your network administrator for the IP address when “ENABLE” is selected for [DHCP].

IP ADDRESS

Set your IP address of the network connected to the monitor when “DISABLE” is selected for [DHCP].

192.168.0.10

SUBNET MASK Set your subnet mask number of the network connected to the monitor when “DISABLE” is 255.255.255.0

selected for [DHCP].

DEFAULT GATEWAY Set your default gateway of the network connected to the monitor when “DISABLE” is selected 192.168.0.1

for [DHCP].

DNS PRIMARY Set your primary DNS settings of the network connected to the monitor. 0.0.0.0

DNS SECONDARY Set your secondary DNS settings of the network connected to the monitor. 0.0.0.0

SETTING COPY In a daisy chain scenario, select the OSD menu categories that you want to copy over to the NO

other monitor. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”.

This function resets to default when power is off. This function has a limit depending on the

cable you use.

COPY START Select “YES” and press the SET button to start copying.

ALL INPUT All input terminals settings are copied when you select this item. Default is off.

MULTI DISPLAY RESET Resets “MULTI DISPLAY” options back to factory settings. -

POWER SAVE Sets how long the monitor waits to go into power save mode after the signal is lost. ON

All inputs except for TV* Note: When connecting DVI, the video card might not stop sending the digital data even though

the image might have disappeared. If this occurs the monitor will not switch into power

management mode (standby mode).

STANDBY MODE Lowers power consumption. ECO

Note: When in ECO STANDBY mode, DDC/CI does not function. STANDBY

HEAT STATUS Displays status of the FAN, BRIGHTNESS and TEMPERATURE. -

FAN CONTROL Cooling fans are running always for X462HB. -

SCREEN SAVER Use the SCREEN SAVER function to reduce the risk of Image Persistence.

GAMMA The display gamma is changed and fixed when “ON” is selected. OFF

BRIGHTNESS The brightness is decreased when “ON” is selected. OFF

NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.

MOTION The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) OFF

at user determined intervals. You can set interval time and zooming ratio.

This function is disabled when PIP, STILL, TEXT TICKER or TILE MATRIX are enabled.

SIDE BORDER COLOR Adjusts the color of the side borders when a 4:3 image is displayed. 15

Press + button, the bar will become lighter.

Press - button, the bar will become darker.

AUTO BRIGHTNESS Adjusts the brightness level according to the input signal. OFF

DPORT, DVI, VGA, RGB/HV inputs only NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.

CHANGE SECURITY Allows the security password to be changed. -

PASSWORD The factory preset password is 0000.

SECURITY LOCK Locks the security password. OFF

DDC/CI ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor. ENABLE

DISPLAY PROTECTION Resets the following settings within the DISPLAY PROTECTION menu back to factory setting: -

RESET POWER SAVE, STANDBY MODE, SCREEN SAVER, SIDE BORDER COLOR,

AUTO BRIGHTNESS, DDC/CI.

DISPLAY PROTECTION

*: The product you purchased may not have this feature.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Comments to this Manuals

No comments

NEC X462HB User Manual Page 26

Comments to this Manuals

Related products and manuals for Public displays NEC X462HB