NEC ESMPRO AlertManager User's Guide Chapter 1 Installing the Alert Manager Chapter 2 Using the Alert Manager Appendix Notes AM_E-UG-W-
Receive Function of Alert 2.3.3 – Receive Alert from Agent(TCP/IP) function: This function receives the alert using the TCP/IP function. This funct
2.4 Operation Preparation Setup To set up the Alert Manager, you must match the event or alert that is to be reported with the report destination an
The following can be set on the Base Setting window. – Function valid/invalid status: Green indicates the function is valid and red indicates the
– Setting report reception measures: The setting of a report reception indicates the preparations required for the manager to receive a report. Here
Use the Destination Setting window as the base point for the setting. – Setting destination IDs: A destination ID is just like a name in an address
Use tree windows for all the settings. – Setting monitor events (Agent's function): Set for each event that is displayed on the tree. The
Bitmap Event type successful information warning error – Setting monitor alerts (Manager's function): Set for each alert to be dis
– Association of monitor alerts with report destinations: Associate each event displayed on the tree with a report destination. Setting results a
2.5 Operation Overview 2.5.1 This section gives an explanation of practical operation for Alert Manager. Basic operation of setting tool Setti
– Configure button: This button makes the base setting of the selected report method. However, the Configure button is not available in some report
Contents Contents...
Other base setting (Other) – Other setting list: Bitmaps indicating other settings are displayed. – Setting bitmap: This bitmap indicates settin
Destination Setting Destination Setting dialog The setting is made by selecting Destination Setting of the Setting menu or a button of the toolbar
ID Setting window – ID: ID names are displayed. – Method: Report methods are displayed. – Address: Report destinations are displayed. How to M
Group Setting window – Group Name: Group names are displayed. – ID: An ID list is displayed. IDs included in the Group Member are not display
Schedule window – Retry Interval: Set the retry interval in the range of 1 to 30 minutes. – Whole Retry Time: Set the maximum retry time in th
How to Make Setting 1. Select Source. 2. Select the event ID you want make it a report object from an Event ID list. 3. Pressing the Add button mo
If the window is opened by the Server name, Server Name is indicated with light color and no selection can be made. Monitor Event Setting Use follo
Suppress window – Suppress Interval: Mark this check box to suppress report of the same event during the Suppress Interval. – Suppress a report
– Source: Source name is displayed. – Event ID: Event ID is displayed. – Event Message: Message is displayed. – Destination ID List: An ID list i
Manager Report (TCP/IP In-Band) No base setting is required. Make the following setting for destination setting. [Manager (TCP/IP In-Band)] dialog
Abbreviations of Operating Systems Windows Operating Systems are referred to as follows. Notations in this document Official names of Windows Window
– [Test]: For the test report, press this button. The test result can be checked by a message. Manager Report (TCP/IP Out-of-Band) No base setting
– [Password]: To gain the Remote Access Service, enter a password of the selected entry. – [Port number]: The port number used for the communicatio
– [E-mail address]: Type in the E-mail address for your mail account in the form user@domain. – [OK]: Set information is added and this dialog box
– [Entry to Use]: Select a Remote Access Service entry from the list. – [User]: Enter RAS user name. – [Password]: Enter RAS user's passwor
– [Time]: To display a time, mark this check box. – [Event Source]: To display a source name, mark this check box. – [Event ID]: To display an eve
– [Product Name]: To display a product name, mark this check box. – [Date]: To display a date, mark this check box. – [Time]: To display a time, m
Writing to File Base setting is not required. For the destination setting, make the following setting: [Write File Setting] dialog is used to set and
– [Event Message]: To display details, mark this check box. – [Recovery Action]: To display how to handle, mark this check box. – [Alert Type]: To
– [OK]: Set information is added and this dialog box closes. – [Cancel]: This dialog box closes with no set information added. – [Test]: For the t
– [Cancel]: This dialog box closes with no set information added. – [Alert Item]: For selecting report items, press this button. – [Test]: For the
Trademarks NEC EXPRESSCLUSTER is a registered trademark of NEC Corporation. Microsoft, Windows, Windows Vista, and Windows Server are registered trade
Setting According to The Report Receiving Method 2.5.4 The [Receive] property sheet of the [Base Setting] dialog is used to select a method from a l
Setting According to Other Report Receiving Method 2.5.5 Select the setting method from a list in the [Other] property sheet of [Base Setting] dialo
If these events occur, the server will shut down. 1. Requested system shutdown from Manager. 2. The temperature exceeds the upper threshold. 3. Th
How to save the Alert Manager setting information 1. Press the [File…] button to select the drive and folder where you want to save the setting info
How to restore the setting information 1. Select the Options menu Restore Alert Manager Setting... 2. Select the drive, folder and correct file nam
Appendix The following report methods cannot be used after you installed this product even if they could be used before installing. – Pager – Mail
Warnings and Additions to This Document 1. Unauthorized reproduction of the contents of this document, in part or in its entirety, is prohibited. 2
1. Installing the Alert Manager Alert Manager software is installed automatically in the Agent and the Manager when Agent software and NEC ESMPRO Mana
2. Using the Alert Manager 2.1 Report the Alert Function The function of the Alert Manager is to direct and manage reports on the alerts occurring
Alert Manager Setting Setting tools include the following: – Report setting function - Used for the setting for monitoring objects (event and alert)
– Internet Mail function: This function uses SMTP protocol to report by Internet Mail. This function requires the Mail Server to support SMTP. Repo
Comments to this Manuals