NEC EA304WMi User Manual download pdf (Page 17)

English-15

English

Tools

VOLUME

Controls the volume of the speakers or headphones.

To mute the speaker output, touch the “PBP/RESET” key (EA274WMi), “

/RESET” key (EA304WMi).

SOUND INPUT (HDMI, DisplayPort inputs only)

This function selects Audio Input, HDMI or DisplayPort.

When PBP MODE is “ON”, outputs the audio signal that is associated with the adjustable screen’s video signal (HDMI

or DisplayPort) or the audio from the input audio jack (AUDIO INPUT) on the back of the monitor (right side of display

below USB port).

VIDEO DETECT

Selects the method of video detection when more than one video inputs are connected.

FIRST: When current video input signal is not present, then the monitor searches for a video signal from the other

video input ports. If the video signal is present in another port, then the monitor switches the video source input port

to the new found video source automatically. The monitor will not look for other video signals while the current video

source is present.

NONE: The monitor will not search the other video input port unless it is turned on.

PBP MODE

Activates PICTURE BY PICTURE (split screen) function and selects the priority (adjustable) screen.

OFF: PBP is OFF. Shows a single screen.

LEFT: PBP is ON. Shows 2 screens. The left screen is select as the priority screen, meaning that any settings will

apply to the left screen.

RIGHT: PBP is ON. Shows 2 screens. The right screen is select as the priority screen, meaning that any settings will

apply to the right screen.

NOTE: When “LEFT” or “RIGHT” is selected, only the selected screen is available to be adjusted.

PBP TYPE

Selects the size of the sub-picture used in PICTURE BY PICTURE (split screen) mode.

AUTO: Shows 2 screens based on the INPUT RESOLUTION and EXPANSION settings for the priority (adjustable)

screen selected in PBP MODE. The available signals used for PBP mode are limited to the following combinations

only.

CENTER: Splits 2 screens divided evenly from the center.

Right picture Source

DVI*

D-SUB HDMI DP

Left

Picture

Source

DVI*

Yes*

Yes Yes Yes

D-SUB No Yes*

Yes*

HDMI No Yes*

Yes*

DP No Yes*

Yes*

*1 When PBP TYPE is selected to AUTO, the “left picture” is displayed on the left half of the display only.

*2 When PBP TYPE is selected to AUTO, the “right picture” is displayed on the right half of the display only.

*3 DualLink

RESPONSE IMPROVE

Turns the Response Improve function on or off. Response Improve may reduce blurring that occurs in some moving

images.

OFF TIMER

Monitor will automatically power down when you have selected a pre-determined amount of time.

Before powering off, a message will appear on the screen asking if you want to delay the turn off time by 60 minutes.

Touch any OSD key to delay the power-down time.

POWER SAVE TIMER

POWER SAVE TIMER allows the monitor to turn off automatically after continuing power saving mode for 2 hours.

LED BRIGHTNESS

You can adjust the blue LED brightness.

DDC/CI

This function allows the DDC/CI function ON or OFF.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Comments to this Manuals

No comments

NEC EA304WMi User Manual Page 17

Comments to this Manuals

Related products and manuals for LED displays NEC EA304WMi