NEC Multisync LCD1990FXP-BK User Manual download pdf (Page 6)

6. Hold all of the cables ﬁrmly and place the cable cover onto the

stand (Figure 7).

7. Slide the Cable Cover back into its correct position (Figure 8).

Connect the power cord to power outlet.

NOTE: Please refer to the Recommended Use section of this manual for proper

selection of power cord.

8. The vacation switch on the back side of the monitor near the AC inlet must be in the

ON position for the monitor to function (Figure 9).

Turn on the monitor using the front power button, then turn on the computer.

NOTE: The Vacation Switch is a true on/off switch. If this

switch is in the OFF position, the monitor cannot be

turned on using the front button.

DO NOT turn the vacation switch ON/OFF repeatedly.

9. For Analog input only: Upon initial setup, the No-Touch Auto Adjust feature auto-

matically adjusts the monitor to the optimal settings that are needed for most signal

timings.

For further adjustments, refer to the Controls section of this User’s Manual for a full

description of the OSM controls.

For download information on the Windows® 95/98/Me/2000/XP INF ﬁle for

your monitor, visit www.necdisplay.com/support.

NOTE: If you have any problems, please refer to the Troubleshooting section of this

User’s Manual.

Highest

Stand

Position

30 Tilt

DVI-I

D-SUB

Figure 4

Figure 5

Quick Start – continued

(DC out for optional NEC products

such as the Soundbar attachment. Do

not use thisconnector unless speciﬁed.)

power card

1 2 3 4 5 6 7 8 9 10 11 ... 106 107

No comments

NEC Multisync LCD1990FXP-BK User Manual Page 6