NEC V322 User Manual download pdf (Page 19)

English-17

English

Picture Aspect

DVI, VGA, DPORT

FULL 1:1 ZOOM NORMAL

HDMI, DVD/HD, SCART, VIDEO1, VIDEO2, S-VIDEO

FULL WIDE DYNAMIC 1:1 ZOOM NORMAL

Aspect ratio

of image

Unchanged view*

Recommended selection

for picture aspect*

4:3

NORMAL

DYNAMIC

Squeeze

FULL

Letterbox

WIDE

Grey areas indicate unused portions of the screen.

NORMAL: Displays the aspect ratio the same as it is sent

from the source.

FULL: Fills entire screen.

WIDE: Expands a 16:9 letter box signal to ﬁ ll entire screen.

DYNAMIC: Expands a 4:3 pictures to ﬁ ll the entire screen

with non-linearity. Some of the outside image area will be cut

off due to expansion.

1:1: Displays the image in a 1 by 1 pixel format.

ZOOM

The image can be expanded beyond the active display area.

The image which is outside of active display area is not

shown.

ZOOM

Power Indicator

Mode Status Indicator Light

Power ON Green*

Power OFF

Power consumption under 0.5 W

Red

Power Save

Power consumption under 1 W*

Amber

Power Standby when “SCHEDULE

SETTINGS” enabled

Green and Amber blink alternately

Diagnosis (Detecting failure) Red Blinking

(See Troubleshooting page 37)

*1 If “OFF” is selected in POWER INDICATOR (page 23), the LED will not light when the

LCD monitor is in active mode.

*2 Without any option, with factory settings, VGA input only.

Using Power Management

The LCD monitor follows the VESA approved DPM Display

Power Management function.

The power management function is an energy saving

function that automatically reduces the power consumption

of the display when the keyboard or the mouse has not been

used for a ﬁ xed period.

The power management feature on your new display has

been set to the “ON” mode. This allows your display to

enter a Power Saving Mode when no signal is applied. This

could potentially increase the life and decrease the power

consumption of the display.

NOTE: Depending on the PC and video card used, this

function may not operate.

NOTE: It takes about 10 minutes for the monitor to go into

power management mode when using DVD/HD,

SCART, VIDEO1, VIDEO2 and S-VIDEO.

Selecting a video source

To view a video source:

Use the input button to set [VIDEO1], [VIDEO2], [S-VIDEO].

Use the COLOR SYSTEM menu to set [AUTO], [NTSC],

[PAL], [SECAM], [PAL60], [4.43NTSC], according to your

video format.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

Comments to this Manuals

No comments

NEC V322 User Manual Page 19

Comments to this Manuals

Related products and manuals for LED displays NEC V322