Nec AT-35 User Manual download pdf (Page 10)

INITIAL SETUP

Setting the Flash Time

The correct hookflash timing depends on the requirements of the PBX to

which the telephone is connected.

1. Ensure the phone is idle.

2. Dial ¿ 4 1 ¿.

3. Dial 00 to 06 to select from the following list of hookflash timings.

00: 95ms

01: 100ms (Default)

02: 120ms

03: 180ms

04: 270ms

05: 300ms

06: 600ms

4. Dial #.

Setting the PBX DIAL Code

When installed as a PBX extension, a trunk access code is often required

to precede external numbers that are dialled. The PBX DIAL key can

automatically insert the PBX trunk access code at the front of a dialled

number, when dialling from a One-Touch key, the IN List (Caller ID), or

when Preview Dialling.

The PBX trunk access code may differ from site to site, according to how

the PBX is configured. To set the PBX DIAL code, follow the steps below.

To change the PBX DIAL code:

1. Ensure the phone is idle.

2. Dial ¿ 0 ¿.

3. Dial the PBX trunk access code 0 to 9. (Default=not assigned.)

4. Dial #.

To clear the PBX DIAL code:

1. Ensure the phone is idle.

2. Dial ¿ 0 ¿ #.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Nec AT-35 User Manual Page 10