CONFIGURATION GUIDE – NEC Express5800/R110f-1E
NEC Corporation Revision 1.0 – July 17, 2013 27
4.3 3.5-inch Drive Configuration
4.3.1 Up to four Drives with Embedded SATA non-RAID Controller
Product Name / Description
Embedded SATA Controller
MiniSAS, 6Gb/s SATA
Internal SAS/SATA Cable
MiniSAS to 4x Single-SATA
3.5-inch Drive Cage
4 x 3.5-inch hot plug drive bays
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
NOTE
Hot plug insertion/removal is not supported with the embedded SATA non-RAID controller.
4.3.2 Up to four Drives with Embedded SATA RAID Controller
Product Name / Description
Embedded SATA Controller
4x 6Gb/s SATA, 6Gb/s SATA
Internal SAS/SATA Cable
MiniSAS to 4x Single-SATA
3.5-inch Drive Cage
4 x 3.5-inch hot plug hard drive bays
500GB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 500 GB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 1 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
2TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 2 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
3TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 3 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
4TB 7.2K Hot Plug 3.5-inch SATA HDD
1 x 4 TB SATA HDD, 3.5-inch, 6Gb/s, 7,200 rpm
NOTE:
Embedded SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
Embedded SATA RAID Controller does not support RAID 10 configured with 2TB or more HDDs.
All hard drives within a RAID array should be of the same capacity.
Comments to this Manuals