Nec MT 1020G /820G User Manual download pdf (Page 25)

E – 25

Power Menu

Tint*

Use the “Adjust” (+) or (–) buttons to adjust the tint.

Sharpness*

Use the “Adjust” (+) or (–) buttons to adjust the sharpness.

Image Mode***

Use the “Adjust” (+) or (–) buttons to choose “Normal” for a regular picture “Natural” for true color

reproduction, or “Document Camera” for a document camera or other low APL picture.

Horizontal Position**

Use the “Adjust” (+) button to move the image right; (–) to move it left.

Vertical Position**

Use the “Adjust” (+) button to move the image up; (–) to move it down.

Auto Picture**

Use the “Adjust” (+) button to turn this feature on so “Picture” and “Fine Picture” adjustments are

made automatically. Use the “Adjust” (–) button to turn this feature off so you can make “Picture

and Fine Picture” adjustments manually.

Picture Adjustment** (when AUTO PICTURE is off)

Use this icon with the “Fine Picture Adjustment” to fine tune the computer image or to remove any

vertical banding that might appear. This function adjusts the clock frequencies that eliminate the

horizontal banding in the image. Press the “Adjust” (+) and (–) buttons until the banding disap-

pears. This adjustment may be necessary when you connect your computer for the first time. This

adjustment is made automatically when the Auto Picture is turned on.

Fine Picture** (when AUTO PICTURE is off)

Use this icon to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This

is evident when part of your image appears to be shimmering.) Use the “Adjust” (+) and (–) buttons

to adjust the image. Use the Fine Adjustment only after the Picture Adjustment is complete. This

adjustment is made automatically when the Auto Picture is turned on.

NOTE:

* Color, Tint, Sharpness and Image Mode controls will not work with an RGB source. The Tint control will

not work with a PAL or SECAM source.

** Horizontal and Vertical position controls, and Picture, Fine Picture and Auto Picture adjustments will not

work with a Video or S-Video source.

*** The Document Camera mode will not work with an RGB or S-Video source.

Provides access to Lamp Usage information and the Auto Start and Power Management features.

Use the “Select” button on the projector cabinet or (▲) (▼) buttons on your remote control to access

a submenu. Then press “Adjust” (+) or (–) to choose a specific option.

Lamp Usage

This tells you how long the lamp has been in operation. It is recommended that you replace a lamp

after 2000 hours of service. After you install a new lamp, select this icon and press and hold the

“Power On” button on the remote control for ten seconds to reset the lamp clock back to zero.

NOTE: The projector will turn off and be in standing by after 2100 hours of service. If this happens, press the

"Power Off" button on the remote control for ten seconds to reset the lamp clock back to zero. Do this only after

replacing the lamp.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

Comments to this Manuals

No comments

Nec MT 1020G /820G User Manual Page 25

Comments to this Manuals

Related products and manuals for Projectors Nec MT 1020G /820G