Nec MT 820 User Manual download pdf (Page 17)

Using A Tabletop Or Cart

1. Place your LCD projector on a flat level surface at the optimal

distance from the screen or wall so you realize the size image you

want. (Avoid having bright room lighting or sun light directly on the

screen or wall where you'll be projecting the image.)

2. Connect the power cable, remove the lens cap and turn the projector

on. (If no input signal is available, the projector will display a

background image.)

3. Ensure that the projector is square to the screen.

4. Move the projector left or right to center the image horizontally on

the screen. (A)

5. To center the image vertically (B), lift the front edge of the projector

and press the buttons on the front of the projector, just above the

feet, to release the one-touch tilt feet. (There is approximately 10.5˚

of up and down adjustment for the front of the projector. )

INSTALLATION

6. To fine tune the image's position vertically on the screen, rotate each

front foot.

7. Increase or reduce the size of the projected image by pressing the

"Zoom" (+) or (–) buttons on the remote control or top of the

cabinet.

FOCUS

ZOOM

ADJUST

ENTER

SELECT

POWER

ON/OFF

STATUSPUSH

(A) Top view

(B) Side view

screen

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

Nec MT 820 User Manual Page 17