Nec MT 820 User Manual download pdf (Page 31)

Settings Menu

Enables you to set preferences and other operating options. Use the “Select” button on the projector cabinet or

(▲) (▼) buttons on your remote control to access the submenu you want.

Custom Memory

This enables you to save your current settings for an RGB source in one of five memories, Custom 1-5.

To change the STANDARD settings, proceed as follows:

1. Connect your computer to the MultSync MT1020/MT820.

2. Select the "STANDARD" in RGB 1 or RGB 2 source.

3. Adjust the horizontal/vertical position, Picture, and Fine Picture adjustments.

4. Select the Custom Memory icon.

5. Press the "Adjust" (+) or (–) buttons to choose a memory location, then press "Enter" on the cabinet or the "Left

Click" on your remote control to save the new settings.

If you do not want to change the STANDARD settings, first select the Custom Memory icon, then do the same

as step 5.

Image Loop

This feature enables you to “capture” an image from a source that is currently being displayed. Up to 8 images

can be stored.

Press the “Adjust” (+) or (–) buttons to select "Start" for the image you want to loop and “Capture” for the

image you want to capture or to select “Delete” and delete all captured images from memory. Press “Enter” on

the cabinet or the “Left Click” on your remote control to save your image loop changes. To stop an image loop,

press one of the “Video”, “S-Video”, “RGB1” or “RGB2” button, or using the Source menu.

OPERATION

Background

Use this feature to display a black or blue screen or to start an image loop when no input signal is available.

Press the “Adjust” (+) or (–) buttons to choose the back screen you want — blue, black or an image loop. Press

“Enter” on the cabinet or the “Left Click” on your remote control to save your change.

NOTE: This feature will not work with Video or S-video sources and the projector will display a black image if no

input signal is present.

Projection

This reorients your image for your type of projection. Press the “Adjust” (+) or (–) button until it is correct.

Press “ENTER” on the cabinet or the “Left Click” on your remote control to save your change. The options are:

front floor projection, rear ceiling projection, rear floor projection, and front ceiling projection.

Language

Use the “Adjust” (+) or (–) to choose one of six languages for on-screen instructions. Press “ENTER” on the

cabinet or the “Left Click” on your remote control to save your change The options are: English, German,

French, Italian, Spanish and Swedish.

Reset

Changes all adjustments to the factory preset levels for each source individually. To activate, you must hold

down the “Adjust” (+) button on the cabinet or remote control for at least two seconds. The adjustments that will

be reset are horizontal and vertical control, picture and fine picture adjustment (for the current source only),

brightness, contrast, color, tint, and sharpness.

* When custom setting is selected, reset changes all adjustment to the factory preset levels of the current input

signal for selected custom memory location.

This will not return to your previous custom settings and will delete your saved settings from custom memory.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Comments to this Manuals

No comments

Nec MT 820 User Manual Page 31

Comments to this Manuals

Related products and manuals for Projectors Nec MT 820