Nec NP2250 User Manual download pdf (Page 127)

113

6. Using On-Screen Menu

[WIRED]

PROFILES (for LAN port [RJ-45]):

Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.

Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.

After doing this, select [OK] and press the ENTER button. This will store your settings in memory.

To recall the settings from memory:

After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.

Select [OK] and press the ENTER button.

DHCP:

Enabling this option automatically assigns an IP address to the projector from your DHCP server.

Disabling this option allows you to register the IP address or subnet mask number obtained from your network

administrator.

IP ADDRESS .......... Set your IP address. Press to display the software keyboard and type in 12 numeric characters.

SUBNET MASK ......

Set your subnet mask number. Press

to display the software keyboard and type in 12 numeric characters.

GATEWAY .............. Set the default gateway of the network connected to the projector. Press to display the software keyboard

and type in 12 numeric characters.

DNS CONFIGURATION

.. Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters

are used.

WINS CONFIGURATION

.. Type in the IP address of your WINS server of the network connected to the projector. This is used for a

shared folder on a different subnet to specify it as a WINS server. 12 numeric characters are used.

NOTE: When [DHCP] is turned on, this option is not available.

RECONNECT .......... Use this button to retry to connect the projector to a network. Try this if you have changed [PROFILES].

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 182 183

No comments

Nec NP2250 User Manual Page 127