NEC Express5800/320Ma User Manual download pdf (Page 86)

Replacing an IDE Backplane Assembly

5-40 Express5800/320Ma: Operation and Maintenance Guide

11. Connect the IDE ribbon cable to the assembly (Figure 5-23).

Push the connector firmly into the backplane until the levers on the backplane

connector snap into place. If necessary, push down on the levers to ensure that

they are locked.

12. Connect the IDE power cable to the assembly. It is keyed to fit correctly.

13. Gently push the IDE ribbon cable down to the bottom of the enclosure and reinsert

it into the retaining clip (to improve airflow into the enclosure).

14. Ensure that the IDE power cable is correctly routed through the notch in the divider

between the backplane and the power supply unit (Figure 5-25). Threading the

cable in this manner prevents damage to the cable when you replace the enclosure

cover.

Figure 5-25. Routing Power Cables Through the Chassis Divider

15. Replace the CD or DVD drive as described in “Replacing a CD or DVD Drive” on

page 5-36.

16. Replace the enclosure cover.

17. Replace the CPU-I/O enclosure.

1 Notch in divider

2Power cables

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 109 110

No comments

NEC Express5800/320Ma User Manual Page 86