NEC MultiSync PA272W User Manual download pdf (Page 20)

English-18

Advanced OSD

If you need detailed information about the controls, please use the advanced menu.

There are 2 ways to access the advanced menu.

Method 1:

• Press the Menu button to access OSD menu. Use the front buttons to move the cursor to the ADVANCED SETTING in Color

control systems. Press INPUT button to open the advanced OSD.

• Press the EXIT button.

Method 2:

• Turn off the monitor.

• Turn on the monitor by pushing the “POWER” and “INPUT/SELECT” button at the same time for at least one second

simultaneously. Then press the control buttons (EXIT, LEFT, RIGHT, UP, DOWN).

• The Advanced OSD will appear.

This menu is larger than the normal OSD.

• Turn off and restart the monitor.

To make an adjustment, ensure that the tag is highlighted, then press “SELECT”.

To move to another tag, press “EXIT”, then press “LEFT” or “RIGHT” to highlight another tag.

Tag1 PICTURE MODE Selects PICTURE MODE, one of 1 to 5.

PRESET Sets PICTURE MODE PRESET from the type of PRESET (see page 17).

BRIGHTNESS*

Adjusts the overall image and screen background brightness.

Press “LEFT” or “RIGHT” to adjust.

WHITE Adjusts the white color by temperature or xy setting. A lower color temperature will make

the screen reddish and a higher color temperature will make the screen bluish. A stronger

x makes the screen reddish, a stronger y makes it greenish and weak xy makes it a

bluish white.

This item does not reset by FACTORY PRESET (Tag7), when the AUTO BRIGHTNESS is set to “ON”.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 38 39

No comments

NEC MultiSync PA272W User Manual Page 20