Nec MT 820 User Manual

Part No. 78409011Printed in JapanNEC Multimedia TheatreNEC Multimedia TheatreLCD ProjectorUser’s ManualNEC Technologies, Inc.1250 N. Arlington Height

Built-In Speakers (1W)Getting To Know Your MultiSyncMT1020/MT820 LCD ProjectorAC InputPlug the female end of the supplied powercable here, and the mal

FOCUSZOOMADJUSTENTERSELECTMENUPOWERON/OFFSTATUSPUSHTop Features1 Power ButtonUse this button to turn the power on and off when the Main Power Switch

Terminal Panel FeaturesThis panel is located in the rear and is where you connect your cables.1 Remote Control Jacksa. Remote Control Input JackConnec

6 RGB Input 1 Connector (D-Sub 15 pin)Connect your PC or other RGB equipment such as IBM or compat-ible computers. Use the NEC MultiCable that's

Remote Control FeaturesYou can use your remote control with the cable or wireless to operate yourMultiSync MT1020/MT820 LCD Projector. With the remote

NOTE: You cannot use Menu and Position at the same time.Remote Control Precautions• Do not look into the laser pointer while it is on.• Do not point t

This section describes how to set up your MultiSync MT1020/MT820 LCDprojector and how to connect video and audio sources.Setting Up Your MultiSync MT1

Using A Tabletop Or Cart1. Place your LCD projector on a flat level surface at the optimaldistance from the screen or wall so you realize the size ima

If your projector is mounted on the ceiling and your image is upside down, use the“Menu” and “Select” buttons on your projector cabinet or (▲) (▼) bu

REMOTE CONTROLPCCONTROLS-VIDEO INPUTINPUTVIDEO INPUT AUDIO INPUTOUTPUTAUDIO OUTPUTAUDIORGB INPUT 1RGB INPUT 2AUDIODC12V/400mAOUTPUTRGB MONITOR OUTPU

PrecautionsPlease read this manual carefully before using your NEC MultiSyncMT1020/MT820 LCD Projector and keep the manual handy for futurereference.Y

3. Use the MultiCable that's supplied to connect your PC or Macintosh computer to theLCD projector. For a PC, use the smaller 15-pin connector on

Changing Video ResolutionsDepending on your computer's graphic capability, you may be ableto select one of several resolutions. Generally a compu

Connecting Your Document CameraYou can connect your MultiSync MT1020/MT820 LCD Projector to a document camera. To do so, simply:1. Turn off the power

Connecting Your Remote Mouse ReceiverThe remote mouse receiver enables you to operate your computer's mouse functions from the NECMultiSync MT102

m The Remote Mouse Receiver as a mouse for your computerSerial cable (supplied)m The Remote sensors on the projector cabinet work as the remote sensor

This section describes how to select a computer or video source and how to adjustthe picture and sound.General Controls Before you turn on your MultiS

Using The Menus1. Press the "Menu" button on the remote control or projector cabinet to display the Main Menu.2. Press the "Select"

Menu Descriptions & FunctionsSource MenuRGB 2Selects the computer connected to your RGB 2 input. Use the "Adjust" (+) or (–) buttons tos

Image AdjustmentMenuColor. Use the “Adjust” (+) or (–) buttons to adjust the color.Tint.Use the “Adjust” (+) or (–) buttons to adjust the tint.Sharpne

Fine Picture ..(when AUTO PICTURE is off)Use this icon to adjust the clock phase or to reduce video noise, dot interference or crosstalk. (This is evi

Important SafeguardsThese safety instructions are to ensure the long life of your LCD projector andto prevent fire and shock. Please read them careful

Provides access to Lamp Usage information and the Auto Start and Power Managementfeatures. Use the “Select” button on the projector cabinet or (▲) (▼)

Settings MenuEnables you to set preferences and other operating options. Use the “Select” button on the projector cabinet or(▲) (▼) buttons on your re

This section describes the simple maintenance procedures you should followto replace the lamp, clean or replace the filter, and replace the batteries

Cleaning Or Replacing The FilterThe air-filter sponge keeps the inside of the MultiSync MT1020/MT820 LCD Projector free fromdust or dirt and should be

Etape 1AEtape 1BEtape 2Etape 3Etape 4Etape 5EnclenchementMAINTENANCE6566Cette section décrit les procédures simples d’entretien que vous aurez à suivr

MAINTENANCE6768Nettoyage ou remplacement du filtreLe coussin éponge du filtre à air maintient l’intérieur du projecteur à affichage à cristaux liquide

This section helps you resolve problems you may encounter while setting up or using your MultiSync MT1020/MT820 LCD Projector.Status Light MessagesTRO

Common Problems & SolutionsProblemDoes not turn onNo pictureImage isn’t square to the screenPicture is blurredImage is scrolling vertically,horizo

This section provides technical information about the MultiSync MT1020/MT820 LCD Projector's performance.OpticalLCD Panel1.3", p-Si TFT acti

Cabinet DimensionsUnit : inch (mm)SPECIFICATIONS757611.3"(286.5)15.4"(390)11.3"(285.0)12.7"(321.0)FOCUSZOOMADJUSTENTERSELECTME

Ce symbole a pour but de prévenir l’utilisateur de laprésence d’une tension dangereuse, non isolée setrouvant à l’intérieur de l’appareil. Elle est d’

D-Sub Pin Assignments PC 15-Pin mini D-Sub Macintosh 15-Pin D-SubPin No. Signal to be connected Pin No Signal to be connected1 Red 1 Red GND2

Timing ChartY/N Signal Resolution Refresh F.H. DotRate (Hz) (kHz) Clk(MHz)Y NTSC 6402480 60 15.734 -Y PAL 7682576 50 15.625 -Y SECAM 7682576 50 15.625

PC Control Command ReferenceCommand CodesNo. Function Code Data Description01 Video 03H No Same as remote02 RGB1 04H No Same as remote03 RGB2 05H No S

Command Codes (continued)No. Function Code Data Description34 Image mode Doc Cam 1DH No35 Image mode Normal 1EH No36 Image mode Natural 1FH No37 Power

44Err 04: Parameter Error ( parameter data abnormal)1254 3678To RxD of PC©PC Control Connector (DIN-8P)Cable ConnectionCommunication ProtocolBaud rate

4. La fumée, la vapeur et l’exposition aux rayons directs du soleil risquent dedétériorer sérieusement les composantes internes.5. Eviter des manipula

NEC MultiSync® LCD ProjectorProductsNEC Technologies, Inc. (hereafter NECTECH) warrants this product to be freefrom defects in material and workmanshi

1. IntroductionIntroduction To The MultiSync MT1020/MT820 LCD Projector ... 13How Do You Get Started? ...

This section introduces you to your new MultiSync MT1020(XGA)/MT820 (SVGA) LCD Projector, provides a list of materialsthat comes with your projector a

How Do You Get Started?The fastest way to get started is to take your time and do everythingright the first time. Take a few minutes now to watch the