Nec XT5000 User Manual download pdf (Page 37)

E – 37

Select one of the following three levels for reducing video noise.

Low, Medium or High.

NOTE: The lower the Noise Reduction level, the better the image

quality. Increasing Noise Reduction lowers video bandwidth.

Color Matrix

Noise Reduction

First, select an appropriate color matrix for your input signal, either

HDTV or SDTV. Then select an appropriate matrix type from B-Y/R-

Y, Cb/Cr, Pb/Pr or IVX.

NOTE: The Color Matrix feature is available for component video

signal only.

Y/C Delay: Adjusts Y/C delay level.

Motion Select: Sets the interpolation method. Selects Still or

Adaptive. Still is used for non moving images such

as a document camera. Select Adapter for all mo-

tion video.

Motion Level: Adjusts level of motion detection when Adaptive

is selected.

YTR Adjustmen (Expert mode only):

Adjusts Luminance Transient Time.

CTR Adjustment (Expert mode only):

Adjusts Chroma Transient Time.

Telecine(Expert mode only)

Use 3:2 pull down correction to eliminate jitter and artifacts in video.

Auto: For film source such as a DVD player

Off: For signals other than film sources

Signal Level

This function is only active when multiple projectors are in use.

Auto Control: Select OK to execute Auto Control.

White: Adjust saturation at the white peak.

R/G/B, Y/Cb/Cr or Y/Pb/Pr Gain (for Expert mode only):

Adjust RGB, Component or HDTV Gain to match

multiple projector color uniformity.

Projector Options

Enables you to set preferences and other operating options.

Timer

Enables you to turn on or off your projector automatically at a

specified time. Two timer functions are available: On/Off Timer

and Sleep Timer.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

No comments

Nec XT5000 User Manual Page 37