NEC Express5800/320Fc Manual download pdf (Page 131)

Initial SNMP Testing

Simple Network Management Using Net-SNMP and ftlSNMP 8-29

Use the following command to bring the CPU-I/O enclosure up again:

# /opt/ft/bin/ftsmaint bringUp 11

# /opt/ft/bin/ftsmaint bringUp 1

Initial Testing of ftlsubagent

Use the snmpwalk tool to perform a get

next operation on a system where an SNMP

master agent is running. See snmpwalk(1). For example, for the ftcPcidevcnf table:

# ./snmpwalk -Os -c public -v 1 -t 40 localhost

1.3.6.1.4.1.458.107.1.2.5.2.1

. . .

ftcPcidevcnfMasterDataParityError

iso.3.6.1.4.1.458.107.1.2.5.2.1.14.0 = INTEGER: 2

iso.3.6.1.4.1.458.107.1.2.5.2.1.14.1 = INTEGER: 2

...

ftcPcidevcnfSignaledSERR

iso.3.6.1.4.1.458.107.1.2.5.2.1.15.0 = INTEGER: 2

iso.3.6.1.4.1.458.107.1.2.5.2.1.15.1 = INTEGER: 2

...

ftcPcidevcnfDetectedParityError

iso.3.6.1.4.1.458.107.1.2.5.2.1.16.0 = INTEGER: 2

iso.3.6.1.4.1.458.107.1.2.5.2.1.16.1 = INTEGER: 2

. . .

Notice that the snmpwalk tool can provide symbolic decoding of absolute

numbers/OIDs.

Removing ftlSNMP

Whenever possible, avoid manual removal of the Net-SNMP and ftlSNMP packages.

Use the standard Linux operating system and Express Builder installation and

upgrade procedures to manage Net-SNMP and ftlSNMP installations and upgrades.

This section documents the manual removal process.

First, stop all server SNMP processes:

# /etc/opt/ft/snmp/scripts/stop_snmp

This stops the SNMP subagents, followed by the master agent. Any errors or warnings

resulting are written to the syslog or stderr. To remove the installed binary RPM,

enter:

# rpm -e lsb-ft-snmp

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 155 156

No comments

NEC Express5800/320Fc Manual Page 131