NEC Express5800/320Fc Manual download pdf (Page 133)

Initial SNMP Testing

Simple Network Management Using Net-SNMP and ftlSNMP 8-31

OpState:Reason Definitions

Tab l e 8-3 lists reason names, SRA-ftLinux-MIB codes, and definitions for ftServer

systems running a supported Linux

distribution together with Express Builder.

19 ONLINE The unit can be communicated with.

20 SIMPLEX A component is online and has no partner;

it is not safe to remove this component.

Applies to components that can be

partnered.

21 DUPLEX The component is online and has a

partner component that is running in

lockstep, mirrored, or available for failover

(depending on the type of component).

This component is safe to remove. Applies

to components that can be partnered.

Table 8-3. Reason Codes, Names, and Definitions (Page 1 of 2)

Code Reason Definition

1 UNKNOWN The cause is not known

2 NONE No reason is available

3 BELOW_MTBF The current MTBF is below the MTBF threshold

specified for this component.

4 DIAGNOSTICS_FAILED This component failed diagnostic testing.

5 HARDWARE_INCOMPATIBLE The component hardware is incompatible with

the online system hardware.

6 HOLDING_DUMP Bring-up failed for dump is in process

9 MEDIA_DISCONNECT Simplex state was entered because a cable was

unplugged.

10 FIRMWARE_BURN_FAIL Failed to update the enclosure’s BIOS or

firmware.

11 FIRMWARE_FILE_NOT_FOUND The entered firmware file path is either incorrect

or the file does not exist.

12 FIRMWARE_FILE_ERROR There was an error in the firmware image on

disk.

Table 8-2. Operation State Values, Names, and Definitions (Page 2 of 2)

Value Operation State (OpState) Definition

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 155 156

No comments

NEC Express5800/320Fc Manual Page 133