Nec NP40 User Manual download pdf (Page 24)

AUTO

ADJ.

ON/STAND BY

FOCUS

LAMP

STATUS

POWER

SELECT

3. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

➊

Turning on the Projector

NOTE: Before turning on the projector, ﬁ rst connect the supplied power cable's three-pin plug to the AC IN of the projector, and

then connect the other plug of the supplied power cable in the wall outlet. Make sure that the projector is in its standby mode

and the power indicator is glowing orange.

1. Remove the lens cap.

POWER

STATUS

LAMP

POWER

STATUS

LAMP

POWER

STATUS

LAMP

Standby Blinking Power On

Steady orange light Blinking green light Steady green light

See page 52 for more details.

PAGE

OFF

POWER

PIC-MUTE

DOWN

FOCUS

CAUTION:

Do not remove the lens cap by pulling on the string.

Doing so can cause mechanical damage to the part

around the lens.

2. Press the POWER (ON/STAND BY) button on the

projector cabinet or the POWER ON button on the

remote control for 1 second.

The POWER indicator will turn to green and the projec-

tor will become ready to use.

TIP:

* Turning on the projector will instantly cause the Auto Focus

function to operate. (→ page

22)

* When the key lock symbol ( ) is displayed at the bottom

right of the menu, it means that the Control Panel Lock is

turned on. (→ page

42)

After you turn on your projector, ensure that the com-

puter or video source is turned on and that your lens

cap is removed.

NOTE: When no signal is available, a blue or black screen is dis-

played.

When the projector displays a blue or black screen, the projector

will automatically switch to the Eco mode.

The projector will return to the Normal mode once a signal is con-

nected.

NOTE: If you turn on the projector immediately after the lamp is

turned off or when the temperature is high, the fans run without

displaying an image for some time and then the projector will dis-

play the image.

CAUTION:

The projector cannot be turned off while the POWER

indicator is blinking green.

• Do not turn off the AC power during this period.

Doing so could cause premature lamp failure.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 73 74

Comments to this Manuals

No comments

Nec NP40 User Manual Page 24

Comments to this Manuals

Related products and manuals for Projectors Nec NP40