Nec NP40 User Manual download pdf (Page 29)

LAMP

STATUS

POWER

ON/STAND BY

SOURCE

AUTO

ADJ.

SELECT

FOCUS

S-VIDEO IN

VIDEO IN

COMPUTER IN

PC CONTROL

SOURCE

AUTO

ADJ.

SELECT

ON/STAND BY

LAMP

STATUS

POWER

FOCUS

AC IN

3. Projecting an Image (Basic Operation)

Adjust the Tilt Foot

1. Lift the front edge of the projector.

CAUTION:

Do not try to touch the ventilation outlet during Tilt Foot adjust-

ment as it can become heated while the projector is turned on and

during its cool down period after it is turned off.

2. Push up and hold the Adjustable Tilt Foot Button on the front

of the projector to extend the adjustable tilt foot (maximum

height).

3. Lower the front of the projector to the desired height.

4. Release the Adjustable Tilt Foot Button to lock the adjustable

tilt foot.

There is approximately 10 degrees (up) of adjustment for the front

of the projector.

Adjusting the height of a projected image or changing the projec-

tion angle will result in the Auto Keystone function quickly cor-

recting the vertical distortion.

Adjustable Tilt Foot

Adjustable Tilt

Foot Button

Ventilation (outlet)

CAUTION:

Do not use the tilt-foot for purposes other than originally intended.

Misuses such as using the tilt foot to carry or hang (from the wall or

ceiling) the projector can cause damage to the projector.

NOTE: The rear foot height can be adjusted up to 0.16 inch/4 mm (1 degree of

angle). Rotate the rear foot to the desired height in order to square the image

on the projection surface. Do not extend the rear foot over 0.16" (4 mm). Do-

ing so will cause the rear foot to come free off the bottom.

Rear foot

Up Down

LAMP

STATUS

POWER

ON/STAND BY

SOURCE

AUTO

ADJ.

SELECT

FOCUS

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 73 74

Comments to this Manuals

No comments

Nec NP40 User Manual Page 29

Comments to this Manuals

Related products and manuals for Projectors Nec NP40