Installing the Operating System with Express Setup 5-53
Setting WOL
Refer to the following procedure to enable WOL.
1. Start Device Manager.
2. Point to [Network adapters] and double click [Intel(R) 82547L Gigabit Network
Connection] to open the adapter [Properties].
3. Click [Power Management] tab and change setting in [Wake On LAN] according to the
following list.
Setting item Change setting
"Wake On Directed Packet" ON or OFF
"Wake On Magic Packet" ON
"Wake on Magic Packet from power off state" ON
"Wake on Link" OFF
IMPORTANT: DirectedPacket
(*1)
will not wake up the system on
Shutdown state even “Wake On Directed Packet” is setting “ON”.
Only on Sleep or Hibernate state will wake up by a DirectedPacket.
(*1) Packet with the Ethernet address of the adapter in ethernet header
or Packet with an IP address assigned to the adapter in IP header.
NOTES:
[Power Saver Options] setting is not necessary to change.
Above setting will be maintained until manually resetting are
executed.
IMPORTANT: The parameters of [Wake On LAN] will not exist, if
the network ports are not available for WOL.
4. Click [OK].
5. Restart the system.
Comments to this Manuals