NEC Express5800/GT110b User's Guide download pdf (Page 439)

100

101

Installing Windows Server 2003 x64 Editions F-5

Create from the menu which appears when running NEC Express5800 Server with

NEC EXPRESSBUILDER.

If you have only NEC Express5800 Server to create Windows Server 2003 x64 Edition OEM-Disk

for EXPRESSBUILDER, use this procedure.

If Windows Server 2003 or Windows can be operated on NEC Express5800 Server, you can use the

other procedure described later.

Follow the steps below.

1. Prepare one Flash FDD or 3.5-inch floppy disk.

2. Turn on your NEC Express5800 Server.

3. Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of the server.

4. Press the RESET switch or press Ctrl, Alt and Delete to reboot the server. (You may also

turn off and then on again to reboot the server.)

The system will boot from the DVD-ROM and NEC EXPRESSBUILDER starts.

5. Select [Create the OEM-Disk for Windows] from [Tools Menu] step.

6. Connect the Flash FDD or insert a floppy disk into the floppy disk drive.

7. Select [Create an Windows Server 2003 x64 Editions OEM-Disk for

EXPRESSBUILDER] at [Create OEM-Disk] and click [Perform].

8. Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER will be created.

Write-protect and attach a label, then keep it safely.

NOTE: If the following message is displayed, the floppy disk is

write-protected.

Cancel write-protected state.

If you have already cancelled write-protected state, connect the floppy

disk drive again.

1 2 ... 434 435 436 437 438 439 440 441 442 443 444 ... 493 494

Comments to this Manuals

No comments

NEC Express5800/GT110b User's Guide Page 439

Comments to this Manuals

Related products and manuals for Servers NEC Express5800/GT110b