Nec NP2250 User Manual download pdf (Page 129)

115

6. Using On-Screen Menu

[ADVANCED] menu

[CONNECTION] (required for wireless only)

SITE SURVEY:

Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.

To select an SSID, highlight [SSID] and use the SELECT



to select [OK] and press the ENTER button.

: Wireless access point

: Ad Hoc PC

: WEP or WPA enabled

SSID (Network name):

Enter an identiﬁer (SSID) for wireless LAN when selecting [INFRASTRUCTURE] or [AD HOC] in [NETWORK

TYPE]. Communication can be done only with equipment whose SSID matches SSID for your wireless LAN. Up

to 32 alphanumeric characters can be used (case sensitive).

NETWORK TYPE:

Select communication method when using wireless LAN.

INFRASTRUCTURE

.. Select this option when communicating with one or more equipment connected to the wireless or wired

LAN network via a wireless access point.

AD HOC ................. Select this option when using the wireless LAN to directly communicate with a computer in peer-to-peer

mode. This is a method that meets the IEEE802.11 wireless standard.

NOTE: When in Ad Hoc mode, only 802.11b is available for communication method.

Data transmission speed in Ad Hoc mode is limited up to 11Mbps.

CHANNEL:

Select a channel. Available channels vary depending on the country and region.

TIP: When you select [INFRASTRUCTURE], make sure that the projector and your access point are on the same channel;

when you select [AD HOC], make sure that the projector and your computer are on the same channel.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 182 183

No comments

Nec NP2250 User Manual Page 129