NEC Express5800/T110g-S User's Guide download pdf (Page 53)

1. Installing Internal Optional Devices

Express5800/T110g-S User’s Guide

Chapter 2 Preparations

Installation

1.8.3

Install a DIMM by using the following procedure.

1. See the steps 1 to 5 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.

2. Hold the server with both hands and slowly and gently lay it so that the left side faces upward

3. Open both levers of the target DIMM slot outward.

4. Hold the DIMM vertically and push it into

the slot.

When the DIMM is inserted correctly, the

lever automatically closes.

Important

Do not apply too much pressure when you push a DIMM into the socket.

Note Align the notch on the DIMM with the key on the slot.

5. Firmly close the lever.

6. Continue to install or remove internal optional devices, mount and connect the server, and turn it on.

7. Confirm that no error messages are displayed in POST screen.

If any error messages are displayed, see Chapter 3 (1. POST Error Message) in "Maintenance Guide".

8. Run the BIOS Setup Utility, go to the Advanced menu, and check the Memory Configuration.

Confirm that the added DIMM has been recognized in the BIOS. Confirm that the applicable DIMM

Group Status is set to "Normal". See Chapter 2 (1. System BIOS) in "Maintenance Guide".

9. Set the paging file size to the recommended value (Total memory size x 1.5) or more.

When using a Windows OS, see Chapter 1 (6.1 Specifying Memory Dump Settings (Debug

Information)) in "Installation Guide (Windows)".

For other OS, see the manual provided with the operating system or contact your sales representative.

Notch

Key

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 127 128

No comments

NEC Express5800/T110g-S User's Guide Page 53