NEC Express5800/T110g-S User's Guide download pdf (Page 63)

1. Installing Internal Optional Devices

Express5800/T110g-S User’s Guide

Chapter 2 Preparations

4. Draw the cable into the chassis and mount the front panel bracket on the server chassis in the

reverse order of the removal procedure.

Connecting to a RAID Controller

1. Connect another connector of the battery control cable to the connector on the RAID controller.

Check the form of the connector and connect the cable straight into the connector. Be careful not

to press it in at an angle when connecting.

Position of the connector

Connect the cable to the connector shown in the figure below.

Arrange the battery cable as shown in

the figure.

With cable tie attached, fixed the battery

cable to the bracket as shown in the figure.

Rear face of RAID controlle

Connector for battery control cable

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 127 128

No comments

NEC Express5800/T110g-S User's Guide Page 63