NEC Express5800/340Hb-R User's Guide download pdf (Page 71)

General Description 2-35

Floppy Disk Drive

A USB floppy disk drive is attached to the main unit. It allows you to read and write (save) data

using floppy disks.

The USB floppy disk drive accepts the following types of floppy disks:

 2HD floppy disk (1.44MB)

 2DD floppy disk (720KB)

IMPORTANT: USB floppy disk drive

When installing the server in rack assembly, connect the USB floppy disk drive to

the lower side of the server by using the rail coming with the server. Ask a

maintenance engineer of your service representative having the expert knowledge

on the server to do the installation, removal and replacement procedures.

Drive Letter of Floppy Disk Drive

The drive letter will change when the primary PCI module is switched to the standby PCI module

while the Windows operating system is in operation. The drive letter of the floppy disk will be

determined as follows:

"A" will be assigned to the floppy disk drive for the PCI module that is operating as the primary PCI

module during Windows operating system boot-up. "B" will be assigned to the floppy disk drive for

the standby PCI module.

Ex) If a floppy disk drive was connected for the first time while the primary PCI module is group 1.

Primary PCI module

PCI module (for group 1): A drive

PCI module (for group 2): B drive

IMPORTANT: In the event that the active PCI module switches to the standby

PCI module due to a failure while the system is in operation, the floppy disk drive

letter will change at the point PCI module switches to the standby module.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 311 312

No comments

NEC Express5800/340Hb-R User's Guide Page 71