NEC NP-UM351WI-TM User Manual download pdf (Page 106)

5. Using On-Screen Menu

TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON]

WhentheprojectorisinStandbymode,applyingacomputerorHDMIsignalfromacomputerconnectedtotheCOM-

PUTERINinput,HDMI1/MHL,orHDMI2inputwillpowerontheprojectorandsimultaneouslyprojecttheimage.

ThisfunctionalityeliminatestheneedtoalwaysusethePOWERbuttonontheremotecontrolortheprojectorcabinet

topowerontheprojector.

Tousethisfunction,rstconnectacomputertotheprojectorandtheprojectortoanactiveACinput.

NOTE:

• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionincom-

binationoftheAUTOPOWEROFFfunction.

• Thisfunctionwillnotbeavailableunderthefollowingconditions:

- whenacomponentsignalisappliedtotheCOMPUTERINterminal

- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied

- whenMHLsignalissppliedtoHDMI1/MHLINterminal

• ToenabletheAUTOPOWERONafterturningofftheprojector,wait5secondsandinputacomputerorHDMIsignal.

 IfacomputerorHDMIsignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERONwillnotworkandtheprojector

remainsinstandbymode.

EnablingPowerManagement[AUTOPOWEROFF]

Theprojectorhaspowermanagementfunctions.Toreducepowerconsumption,thepowermanagementfunctions(1

and2)arefactorypresetasshownbelow.TocontroltheprojectorfromanexternaldeviceviaaLANorserialcable

connection,usetheon-screenmenutochangethesettingsfor1and2.

1. STANDBY MODE (Factory preset: NORMAL)

To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE].

NOTE:

• When[NORMAL]isselectedfor[STANDBYMODE],thefollowingterminalsandfunctionswillnotwork:

 MONITOROUTterminal,AUDIOOUTterminal,USB(PC)port,LANfunctions,MailAlertfunction,DDC/CI(VirtualRemoteTool)

2. AUTO POWER OFF (Factory preset: 1 hour)

To control the projector from an external device, select [OFF] for [AUTO POWER OFF].

NOTE:

• When[1:00]isselectedfor[AUTOPOWEROFF],youcanenabletheprojectortoautomaticallyturnoffin60minutesifthereis

nosignalreceivedbyanyinputorifnooperationisperformed.

SelectingDefaultSource[DEFAULTSOURCESELECT]

Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.

LAST �� Sets the projector to default to the previous or last active input each time the projector is turned on�

AUTO �� Searches for an active source in order of COMPUTER → HDMI1/MHL → HDMI2 → VIDEO → USB-A →

USB-B → COMPUTER and displays the ﬁrst found source�

COMPUTER �� Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on�

HDMI1/MHL �� Displays the digital source from the HDMI 1/MHL IN terminal every time the projector is turned on�

HDMI2 �� Displays the digital source from the HDMI 2 IN terminal every time the projector is turned on�

VIDEO �� Displays the Video source from the VIDEO IN terminal every time the projector is turned on�

USB-A �� Displays slides or plays back movie ﬁles from the USB memory device every time the projector is turned

on�

LAN �� Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit�

USB-B �� Displays the computer signal from the USB (PC) terminal every time the projector is turned on�

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 151 152

Comments to this Manuals

No comments

NEC NP-UM351WI-TM User Manual Page 106

Comments to this Manuals

Related products and manuals for Data projectors NEC NP-UM351WI-TM