NEC NP901W User Manual download pdf (Page 106)

6. Using On-Screen Menu

4. Select [OK] and press the ENTER button.

This will complete the settings.

You will be returned to the [PROGRAM LIST] screen.

NOTE:

• Up to 30 different timer settings can be programmed.

• When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.

• The Program Timer is executed on a set time basis, not in a program basis.

• Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be

cleared automatically and the program will be disabled.

• When the on-time and the off-time set for the same time, the off-time setting will take preference.

• Two different sources are set for the same time, the larger program number will take preference.

• The on-time setting will not be executed while the cooling fans are running or an error is occurring.

• If the off-time setting is expired under the condition in which the power off is not possible, the off-timer setting will not be ex

ecuted until the power off becomes possible.

• Programs not marked with a check mark in [ACTIVE] of the [EDIT] screen will not be executed even if the Program Timer is en

abled.

• When the projector is turned on by using the program timer and if you want to turn off the projector, set the off-time or do it

manually so as not to leave the projector on for a long period of time.

Activating the program timer

1. Select [ON] on the [PROGRAM TIMER] screen and press the ENTER button.

The [ON] will be activated.

2. Press the EXIT button.

The [PROGRAM TIMER] screen will be changed to the [TOOL] screen.

NOTE:

• Selecting [OFF] will disable the Program Timer even when a program is marked with a check mark on [PROGRAM LIST]screen.

• When the [ON] is turned on, the [PROGRAM LIST] cannot be edited. To edit the programs, select [OFF] to turn off the Program

Timer.

Changing the programmed settings

1. On the [PROGRAM LIST] screen, select a program you want to edit and press the ENTER button.

2. Change the settings on the [EDIT] screen.

3. Select [OK] and press the ENTER button.

The programmed settings will be changed.

You will be returned to the [PROGRAM LIST] screen.

Changing the order of programs

1. On the [PROGRAM LIST] screen, select a program whose order you want to change and press the SE-

LECT



button.

2. Press the SELECT



button to select





3. Press the ENTER button a few times to select a row to which you wish to move the program.

The order of the programs will be changed.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 164 165

Comments to this Manuals

No comments

NEC NP901W User Manual Page 106

Comments to this Manuals

Related products and manuals for Data projectors NEC NP901W