NEC NP901W User Manual download pdf (Page 116)

102

6. Using On-Screen Menu

[WIRED]

Proﬁles (for LAN port [RJ-45]):

Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.

Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.

After doing this, select [OK] and press the ENTER button. This will store your settings in memory.

To recall the settings from memory:

After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.

Select [OK] and press the ENTER button.

DHCP:

Enabling this option automatically assigns an IP address to the projector from your DHCP server.

Disabling this option allows you to register the IP address or subnet mask number obtained from your network

administrator.

IP ADDRESS .......... Set your IP address. Press to display the software keyboard and type in 12 numeric characters.

SUBNET MASK ......

Set your subnet mask number. Press

to display the software keyboard and type in 12 numeric characters.

GATEWAY .............. Set the default gateway of the network connected to the projector. Press to display the software keyboard

and type in 12 numeric characters.

DNS CONFIGURATION

.. Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters

are used.

RECONNECT ..........

Use this button to retry to connect the projector to a network. Try this if you have changed [PROFILES].

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 164 165

No comments

NEC NP901W User Manual Page 116