Nec M350X User Manual download pdf (Page 100)

5. Using On-Screen Menu

TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON(COMP1)]

WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputerconnectedtotheCOMPUTER1

INinputwillpowerontheprojectorandsimultaneouslyprojectthecomputer’simage.

ThisfunctionalityeliminatestheneedtoalwaysusethePOWERbuttonontheremotecontrolortheprojectorcabinet

topowerontheprojector.

Tousethisfunction,rstconnectacomputertotheprojectorandtheprojectortoanactiveACinput.

NOTE:

• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionincom-

binationoftheAUTOPOWEROFFfunction.

• Thisfunctionwillnotbeavailableunderthefollowingconditions:

- whenacomponentsignalisappliedtotheCOMPUTER1INconnector

- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied

• ToenabletheAUTOPOWERON(COMP1)afterturningofftheprojector,wait3secondsandinputacomputersignal.

 Ifacomputersignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERON(COMP1)willnotworkandtheprojector

remainsinstandbymode.

EnablingPowerManagement[AUTOPOWEROFF]

Whenthisoptionisselectedyoucanenabletheprojectortoautomaticallyturnoff(attheselectedtime:5min.,10min.,

20min.,30min.)ifthereisnosignalreceivedbyanyinputorifnooperationisperformed.

SelectingDefaultSource[DEFAULTSOURCESELECT]

Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.

LAST �� Sets the projector to default to the previous or last active input each time the projector is turned on�

AUTO �� Searches for an active source in order of COMPUTER1 → COMPUTER2 → HDMI → VIDEO → S-VIDEO →

VIEWER → USB DISPLAY →

COMPUTER1 and displays the ﬁrst found source�

COMPUTER1 �� Displays the computer signal from the COMPUTER 1 IN connector every time the projector is turned on�

COMPUTER2 �� Displays the computer signal from the COMPUTER 2 IN connector every time the projector is turned on�

HDMI �� Displays the digital source from the HDMI IN connector every time the projector is turned on�

VIDEO �� Displays the Video source from the VIDEO IN connector every time the projector is turned on�

S-VIDEO �� Displays the Video source from the S-VIDEO IN connector every time the projector is turned on�

VIEWER �� Displays slides or plays back movie ﬁles from the USB memory device every time the projector is turned

on�

NETWORK �� Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit�

USB DISPLAY �� Displays the computer signal from the USB (PC) port every time the projector is turned on�

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 154 155

No comments

Nec M350X User Manual Page 100