NEC Express5800/R120e-1M User's Guide download pdf (Page 117)

2. Installation and Connection

Express5800/R120e-1M User’s Guide

117

Chapter 2 Preparations

4. Because there are stoppers, the server will

come to a stop halfway. Press and hold Rail

Stopper on the rails and pull the server out

of the rack.

Important

Be careful not to get your fingers caught in the rails or lever.

5. Hold the server firmly and remove it from the rack.

Important

• While more than one person is supporting the bottom part of the server,

slowly pull out the server.

• Do not apply pressure on the server from top when it is being pulled out.

Doing so cause the server to drop.

(3) Removing Outer Rail

Remove outer rails from the rack in the following procedure.

1. See Chapter 2 (2.1.2 Installing the server to the rack or removing it from the rack, (2) Removal

procedure) to remove the server from the rack.

2. Push the unlock lever on outer rail to the

direction shown by arrow to house the slide

rail.

3. While pressing the lever on outer rail, push

the outer rail toward inside of the rack, then

remove it.

ロック機構ロック解除レバー

Unlock lever

レールストッパー

Rail Stopper

Locking mechanism

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 137 138

No comments

NEC Express5800/R120e-1M User's Guide Page 117