Referring to Property of Logical Drive
For the information on a Logical Drive, see the property of the Logical Drive.
T
o display the property of Logical Drive by RAID Viewer, click
the Logical Drive whose information is to be seen on the Tree
View and click [Properties] on the [File] menu.
The [Logical Drive Properties] dialog box contains the
[General] and [Option] tabs.
The [General] tab indicates the property of the Logical Drive.
>raidcmd property -tg=ld -c=1 -l=2
RAID Controller #1 Logical Drive #2
ID : 1
Disk Array Information : 2 (order 1/1)
RAID Level : RAID 5
Capacity : 10GB
Stripe Size : 64KB
Cache Mode (Setting) : Auto Switch
Cache Mode (Current) : Write Back
Type : Logical Drive
Status : Online
>
The [Option
] tab allows you to see the settings of the Logical
Drive.
You can change the settings in the Advanced Mode.
Use "property" command to see property of a Logical Drive
by raidcmd.
-tg : Specify "ld" to see property of a Logical Drive
-c : Number of the RAID Controller
-l : Number of the Logical Drive
Ex. Refer to the property of the Logical Drive with RAID
Controller Number:1 and Logical Drive Number:2.
raidcmd property -tg=ld -c=1 -l=2
53
Comments to this Manuals