NEC Express5800/R110f-1E User Manual download pdf (Page 56)

Item

RAID Viewer

Item

raidcmd

Description

Enclosure Enclosure Indicates the number of Enclosure inserted Physical Device.

This value is the original identification value of Enclosure.

Enclosure Position Enclosure Position Indicates the location where Enclosure in which Physical Device is inserted is

connected.

Internal

Port[Port Number] Position[Position]

Internal

Port[Port Number] Position[Position]

Port Number : the number of the Port with which the RAID Controller and

Enclosure is connected

Position : the depth of the daisy chain (number starting form 1)

Slot Slot Indicates the number of Slot inserted Physical Device.

This value is a number starting from 0 or 1.

ID ID Indicates the original identification value of the Physical Device. Use this value to

match Physical Devices managed by the RAID Configuration utility of the RAID

Controller and those managed by the Universal RAID Utility.

The format of the ID varies depending on the types of RAID Controllers.

Device Type Device Type Indicates the type of Physical Device.

Four possible types are as follows:

HDD : Hard Disk Drive

HDD(SSD) : Solid State Drive

Tape Drive : Tape Drive

CD/DVD : CD drive or DVD drive

Interface Interface Indicates the type of the interface to which the Physical Device is connected.

Two possible types are as follows:

SAS : Serial Attached SCSI

SATA : Serial ATA

Vendor/Model Vendor/Model Indicates the vendor and model name of the Physical Device.

Firmware Version Firmware Version Indicates the version of the Physical Device.

Serial Number Serial Number Indicates the serial number of the Physical Device.

This item is indicated when Device Type item is HDD or HDD(SSD).

Capacity Capacity Indicates the capacity of the Physical Device in GB.

This item is indicated when Device Type item is HDD or HDD(SSD).

Status Status Indicates the status of the Physical Device.

Five possible status are as follows:

Online: Indicates that the Physical Device is incorporated into a Logical Drive to

operate normally.

Failed: Indicates that the Physical Device is incorporated.

Rebuilding: Indicates that the Physical Device is rebuilding.

Hot Spare: Indicates that the Physical Device is set as a Hot Spare.

Ready: Indicates that the Physical Device is not incorporated into a Logical Drive.

This item is indicated when Device Type item is HDD or HDD(SSD).

Hot Spare

Information

Hot Spare

Information

Indicates the Hot Spare mode of the Physical Device if it is specified as a Hot

Spare. Two possible modes are as follows:

Global: The Physical Device can be used as a Hot Spare of any Disk Array in the

RAID Controller.

Dedicated: The Physical Device can be used as a Hot Spare of the specified Disk

Array. Also indicates the number of the specified Disk Array.

This item is displayed only when Status is Hot Spare.

S.M.A.R.T. S.M.A.R.T. Indicates the diagnosis result of S.M.A.R.T.(Self-Monitoring, Analysis and

Reporting Technology) function. Two possible statuses are as follows.

Normal: Does not detect any error caused by the S.M.A.R.T. function.

Detected: Detects one or more errors caused by the S.M.A.R.T. function.

This item is indicated when Device Type item is HDD or HDD(SSD).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 134 135

Comments to this Manuals

No comments

NEC Express5800/R110f-1E User Manual Page 56

Comments to this Manuals

Related products and manuals for RAID controllers NEC Express5800/R110f-1E