Nec M350X User Manual download pdf (Page 115)

105

6. Installation and Connections

• Selectthesourcenameforitsappropriateinputconnectorafterturningontheprojector.

Inputconnector

SOURCEbuttonontheprojector

cabinet

Buttonontheremotecontrol

COMPUTER1IN COMPUTER1 (COMPUTER1)

COMPUTER2IN COMPUTER2 (COMPUTER2)

HDMIIN HDMI HDMI

USB(PC) USBDISPLAY (USBDISPLAY)

NOTE:TheprojectorisnotcompatiblewithvideodecodedoutputsoftheNECISS-6020switcher.

NOTE:AnimagemaynotbedisplayedcorrectlywhenaVideoorS-Videosourceisplayedbackviaacommerciallyavailablescan

converter.

Thisisbecausetheprojectorwillprocessavideosignalasacomputersignalatthedefaultsetting.Inthatcase,dothefollowing.

* Whenanimageisdisplayedwiththelowerandupperblackportionofthescreenoradarkimageisnotdisplayedcorrectly:

 ProjectanimagetollthescreenandthenpresstheAUTOADJ.buttonontheremotecontrolortheprojectorcabinet.

NOTE:WhenViewingaDVIDigitalSignal

• UseaDVI-to-HDMIcablecompliantwithDDWG(DigitalDisplayWorkingGroup)DVI(DigitalVisualInterface)revision1.0stan-

dard.Thecableshouldbewithin197"/5mlong.

• TurnofftheprojectorandthePCbeforeconnectingtheDVI-to-HDMIcable.

• ToprojectaDVIdigitalsignal:Connectthecables,turntheprojectoron,thenselecttheHDMIinput.Finally,turnonyourPC.

 Failuretodosomaynotactivatethedigitaloutputofthegraphicscardresultinginnopicturebeingdisplayed.Shouldthishappen,

restartyourPC.

• SomegraphicscardshavebothanalogRGB(15-pinD-Sub)andDVI(orDFP)outputs.Useofthe15-pinD-Subconnectormay

resultinnopicturebeingdisplayedfromthedigitaloutputofthegraphicscard.

• DonotdisconnecttheDVI-to-HDMIcablewhiletheprojectorisrunning.Ifthesignalcablehasbeendisconnectedandthen

reconnected,animagemaynotbecorrectlydisplayed.Shouldthishappen,restartyourPC.

NOTE:When[VIEWER],[NETWORK],or[USBDISPLAY]isselectedfor[SOURCE],soundfromtheCOMPUTER2AUDIOINmini

jackwillbeoutputthroughthespeaker.

NOTE:HDMIinputsignal

DisconnectingandconnectingtheHDMIcablemayresultinnopicturebeingdisplayedfromtheHDMIequipmentwhiletheprojec-

torisrunning.

Shouldthishappen,selecttheHDMIinputagain.

<TwowaystoselecttheHDMIinput>

• PresstheHDMIbuttonontheremotecontrol.

• PresstheMENUbuttonontheprojectorcabinet,thenselect[HDMI]from[SOURCE].

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 154 155

No comments

Nec M350X User Manual Page 115