Nec MT830 User Manual download pdf (Page 32)

E-31

Provides access to Lamp Usage information and the Auto Start and Power Management features. Use

the “Select” button on the projector cabinet or (▲) (▼) buttons on your remote control to access a

submenu. Then press the Mouse pad (+) or (–) to choose a specific option.

Lamp Usage

This tells you how long the lamp has been in operation. It is recommended that you replace a lamp

after 2000 hours of service. After you install a new lamp, select this icon and press and hold the

“Power On” button on the remote control for ten seconds to reset the lamp clock back to zero.

NOTE: The projector will turn off and go into stand by mode after 2100 hours of service. If this

happens, press the "Power Off" button on the remote control for ten seconds to reset the lamp clock

back to zero. Do this only after replacing the lamp.

Auto Start

Turns the LCD projector on automatically when the main power switch is turned on. This eliminates

the need to always use the “Power” button on the remote control or projector cabinet. Press the

Mouse pad (+) to turn this feature on and (–) to turn it off.

Power Management

When “Power Off” is on and there is no RGB video input for five minutes or more, the projector will

automatically turn itself off. Press the Mouse pad (+) to turn this feature on and (–) to turn it off. This

feature does not work with Video or S-Video sources.

Keystone Save

This enables you to save your current keystone settings. Saving your change once affects all sources.

Use the Mouse pad (+) button to turn the feature on so you save the keystone adjustments; (-) to turn

the feature off so you can cancel them.

On Screen Mute

Use the Mouse pad (+) button to turn off the on screen ; (-) to restore it. The On screen Mute feature

is valid for turning on and switching inputs only.

Power Menu

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

No comments

Nec MT830 User Manual Page 32