NEC Express5800/R120d-1M User Manual download pdf (Page 87)

5. Details of EXPRESSBUILDER

Express5800/R120d-1M, R120d-2M Maintenance Guide

Chapter 2 Convenient Features

Details of EXPRESSBUILDER

EXPRESSBUILDER helps you to install Windows and check the server. Bundled software and documents are

provided in EXPRESSBUILDER.

5.1

Storage Media

EXPRESSBUILDER can be operated from the following two ways.

Tips

Remove other removable media before starting EXPRESSBUILDER.

DVD:

EXPRESSBUILDER DVD is supplied as standard. This is used in the following two ways:

(1) Insert the DVD to the optical disk drive of the server, and then reboot by turning off and on the server or

by pressing <Ctrl> + <Alt> + <Delete> keys.

Boot Selection Menu shown in Chapter 2 (5.2 Menu) - (1) Boot Selection Menu appears.

(2) Insert the DVD into a computer on which Windows is running.

Autorun Menu shown in Chapter 2 (5.2 Menu) - (4) Autorun Menu appears.

Internal Flash Memory (optional):

If Internal Flash Memory is installed in the server, EXPRESSBUILDER can be started from it.

Note

It is necessary to copy EXPRESSBUILDER to Internal Flash Memory first except

BTO(Built to order). For details, refer to (2) Manage in Chapter 2 (5.4 Setting Up

EXPRESSBUILDER Operating Environment).

Press <F3> key when the following message appears on POST screen. At this time, be sure to remove a

bootable disc from the optical disk drive.

Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network

If <F3> Internal Flash Memory is not displayed on POST screen

, make sure that Internal Flash

Memory is connected correctly by referring to a) in Chapter 2 (5.4 Configure EXPRESSBUILDER Settings) -

(2) Manage Internal Flash Memory .

When EXPRESSBUILDER is started from Internal Flash Memory, Boot Selection Menu shown in Chapter 2

(5.2 Menu) - (1) Boot Selection Menu appears.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 130 131

No comments

NEC Express5800/R120d-1M User Manual Page 87